Silane-modified sodium–aluminium silicates — fillers used in polyurethane elastomers
- 1 January 2001
- journal article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 15 (14) , 1711-1724
Abstract
Sodium-aluminium silicates of a high degree of dispersion were obtained. Studies on the surface modification of sodium-aluminium silicates using silane coupling agents are described. The best modifiers, which induced a change of the silicate surface from a hydrophilic to a hydrophobic one, were selected. Physicochemical analyses of the obtained silicates were performed. The methods of evaluating the degree of surface modification of the silicate are presented. Attempts were made to employ the unmodified and modified sodium-aluminium silicates as fillers in polyurethane elastomers. The introduction of sodium-aluminium silicate into urethane elastomer induced increases in composite parameters such as tensile strength, relative elongation, and hardness. The most pronounced reinforcing effects were observed with urethane elastomers filled with sodium-aluminium silicate modified with an aminosilane (A-1120).Keywords
This publication has 11 references indexed in Scilit:
- Silane Adsorption Behavior, Microstructure, and Properties of Glycidoxypropyltrimethoxysilane-Modified Colloidal Silica CoatingsJournal of Colloid and Interface Science, 1998
- Determination of the acid-base properties for 3-amino, 3-chloro and 3-mercaptopropyltrimethoxysilane coatings on silica surfaces by XPSColloids and Surfaces A: Physicochemical and Engineering Aspects, 1997
- Modified sodium aluminium silicate — A highly dispersed polymer filler and a pigmentColloids and Surfaces A: Physicochemical and Engineering Aspects, 1996
- Surface modification of silica gels with aminoorganosilanesColloids and Surfaces A: Physicochemical and Engineering Aspects, 1995
- Characterization of silica surfaces hydrophobized by octadecyltrichlorosilaneColloids and Surfaces A: Physicochemical and Engineering Aspects, 1994
- Highly dispersed precipitated silicas as agents improving products made on the base of polymers and as thickening agents in toothpastesPowder Technology, 1993
- NIR studies of the surface modification in silica fillersColloid and Polymer Science, 1988
- Wetting, swelling and sediment volumes of organophilic claysColloids and Surfaces, 1986
- Sorption and immersional wetting on clay minerals having modified surfaceJournal of Colloid and Interface Science, 1986
- Silane Coupling Agents1982