Effect of different expanded aggregates on the properties of lightweight concrete
- 1 January 2019
- journal article
- research article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 71 (2) , 95-107
Abstract
Lightweight aggregate concrete is a material which has much lower density than normal concrete and many advantages, including advanced insulation performance due to its highly porous or cellular characteristics. Several types of lightweight aggregates have been used to produce lightweight aggregate concrete, and the characteristics of such lightweight aggregates strongly affect the material properties. In this study, three different expanded materials – expanded glass (Liaver), expanded clay (Liapor) and foam glass (Ecoglas) – were utilised as lightweight aggregates, and their effects on the properties of lightweight concrete were investigated. These expanded lightweight aggregates are light and have lower thermal conductivity as well as water absorption than those of normal aggregates. Microstructural characteristics of the specimens with different types of aggregate were examined using X-ray micro-computed tomography. The thermal (thermal conductivity) and mechanical (compressive strength) properties of the lightweight concrete specimens were evaluated experimentally and numerically. The relationship between the physical properties and characteristics was analysed to demonstrate the effect of each expanded aggregate on lightweight aggregate concrete.Keywords
This publication has 41 references indexed in Scilit:
- Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into considerationArchives of Civil and Mechanical Engineering, 2011
- Lightweight composite concrete produced with water treatment sludge and sawdust: Thermal properties and potential applicationConstruction and Building Materials, 2010
- Development of lightweight concrete with high resistance to water and chloride-ion penetrationCement and Concrete Composites, 2010
- Application of genetic algorithm for modeling of dense packing of concrete aggregatesConstruction and Building Materials, 2010
- Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concreteConstruction and Building Materials, 2009
- Packing density measurement and modelling of fine aggregate and mortarCement and Concrete Composites, 2009
- Optimal multi-level thresholding using a two-stage Otsu optimization approachPattern Recognition Letters, 2009
- A new mix design concept for earth-moist concrete: A theoretical and experimental studyCement and Concrete Research, 2008
- Engineering properties of lightweight aggregate concrete made from dredged siltCement and Concrete Composites, 2006
- Self-Compacting Concrete: Theoretical and experimental studyCement and Concrete Research, 2005