Design feature combinations effects of running shoe on plantar pressure during heel landing: A finite element analysis with Taguchi optimization approach
Authors:
Open Access
- 13 September 2022
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 10, 959842
Abstract
Large and repeated impacts on the heel during running are among the primary reasons behind runners’ injuries. Reducing plantar pressure can be conducive to reducing running injury and improving running performance and is primarily achieved by modifying the design parameters of running shoes. This study examines the effect of design parameters of running shoes (i.e., heel-cup, insole material, midsole material, and insole thickness) on landing peak plantar pressure and determines the combination of different parameters that optimize cushion effects by employing the Taguchi method. We developed the foot–shoe finite element (FE) model through reverse engineering. Model assembly with different design parameters was generated in accordance with the Taguchi method orthogonal table. The effectiveness of the model was verified using the static standing model in Ansys. The significance and contribution of different design parameters, and the optimal design to reduce plantar pressure during landing, were determined using the Taguchi method. In the descending order of percentage contribution was a conforming heel-cup (53.18%), insole material (25.89%), midsole material (7.81%), and insole thickness (2.69%). The more conforming heel-cup (p < 0.001) and softer insole (p = 0.001) reduced the heel pressure during landing impact. The optimal design of running shoe in this study was achieved with a latex insole, a 6 mm insole thickness, an Asker C-45 hardness midsole, and a 100% conforming heel-cup. The conforming heel-cup and the insole material significantly affected the peak plantar pressure during heel landing. The implementation of a custom conforming heel-cup is imperative for relieving high plantar pressure for long-distance heel-strike runners.Keywords
This publication has 62 references indexed in Scilit:
- A Finite Element Model of the Foot and Ankle for Automotive Impact ApplicationsAnnals of Biomedical Engineering, 2012
- Designing Experimental Methods to Predict the Expansion Ratio of EVA Foam Material and Using Finite Element Simulation to Estimate the Shoe Expansion ShapeMATERIALS TRANSACTIONS, 2012
- Using an Optimization Approach to Design an Insole for Lowering Plantar Fascia Stress—A Finite Element StudyAnnals of Biomedical Engineering, 2008
- Multi-plug insole design to reduce peak plantar pressure on the diabetic foot during walkingMedical & Biological Engineering & Computing, 2008
- FOOT STRIKE PATTERNS OF RUNNERS AT THE 15-KM POINT DURING AN ELITE-LEVEL HALF MARATHONJournal of Strength & Conditioning Research, 2007
- Parametric design of pressure-relieving foot orthosis using statistics-based finite element methodMedical Engineering & Physics, 2007
- Foot Strike Patterns of Runners at the 15-km Point During an Elite-Level Half MarathonJournal of Strength & Conditioning Research, 2007
- Running InjuriesSports Medicine, 1992
- The Mechanical Characteristics of the Collateral Ligaments of the Human Ankle JointFoot & Ankle, 1988
- Effects of Shoe Cushioning Upon Ground Reaction Forces in RunningInternational Journal of Sports Medicine, 1983