Improvement of SiC – Si / MAS Interface in the Joints via In Situ Synthesizing SiC Nanowires
Authors:
- 13 November 2013
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 96 (12) , 3926-3932
Abstract
Improving the SiC – Si / MAS interface is essential for enhancing the SiC – Si / MAS joint strength. In this work, well‐dispersed SiC nanowires (NWs) were in situ synthesized at the SiC – Si / MAS interface in the joints as the anchors, which made the fracture feature of the joints change from SiC – Si / MAS interface fracture to MAS fracture, resulting in an obvious improvement of the shear strength. The results showed that the average shear strength of the joints was increased by 49% by in situ synthesizing SiC NWs, which was primarily attributed to the excellent interface anchoring effects of SiC NWs involving the interfacial bonding anchoring between SiC NWs and SiC – Si layer and the mechanical interlocking anchoring between SiC NWs with the junctions and the surrounding grains. This study may provide new insight into the anchoring mechanisms and suggest a new design methodology for nanowire joints, leading to improved joint strength.Keywords
Funding Information
- National Natural Science Foundation of China (51221001, 51272212, 51275417, B08040)
- Author of National Excellent Doctoral Dissertation of China (201036)
- Ministry of Education and the Doctorate Foundation of Northwestern Polytechnical University
This publication has 21 references indexed in Scilit:
- A multi-wall carbon nanotube-reinforced high-temperature resistant adhesive for bonding carbon/carbon compositesCarbon, 2012
- Effect of carbon nanotubes on the strength of adhesive lap joints of C/C and C/C–SiC ceramic fibre compositesInternational Journal of Adhesion and Adhesives, 2011
- Study of joining of carbon/carbon composites for ultra stable structuresJournal of the European Ceramic Society, 2010
- The preparation and performance of short carbon fiber reinforced adhesive for bonding carbon/carbon compositesCarbon, 2008
- Oxidation microstructure studies of reinforced carbon/carbonCarbon, 2006
- Effect of temperature and layer thickness on these strengths of carbon bonding for carbon/carbon compositesCarbon, 2005
- Oxidation Behavior of Silicon-Infiltrated Carbon/Carbon Composites in High-Enthalpy Convective EnvironmentJournal of the American Ceramic Society, 2004
- The durability of adhesive/carbon–carbon composites joints in salt waterInternational Journal of Adhesion and Adhesives, 2004
- Joining of surface modified carbon/carbon composites using a barium-aluminum-boro-silicate glassJournal of the European Ceramic Society, 1998
- Joining of Carbon—Carbon Composites Using Boron and Titanium Disilicide InterlayersJournal of the American Ceramic Society, 1997