Impact of Infill Strategy and Process Parameters on Selectivity and Performance of PLA Structures Obtained by 3D Printing
Authors:
- Mehrez Ben RezgMRMehrez Ben Rezg
- Mamoun FellehMFMamoun Felleh
- Alex MontagneAMAlex Montagne
Preprint
- 16 August 2024
- preprint
- Published by Springer Nature in Research Square
Abstract
In recent years, fused deposition manufacturing (FDM) techniques have been seen as the processes of the future. One of the main challenges is to identify the optimal parameterization of the 3D printing process in terms of quality, productivity, and service durability of the resulting structures. Hardness is little studied in the literature dedicated to PLA structures, despite its importance in terms of mechanical strength and wear resistance. The correlations between the hardness of PLA structures and the parameters for adjusting 3D printing processes are almost unstudied in the scientific literature. In contrast, this work evaluates the impact of FDM process parameters on the resulting microhardness characteristics (Top/Bottom) using Design of Experiment (DOE) tools. The impact of input factors such as filling strategy, extrusion temperature and layer number in 3D printing on the behavior of polylactic acid (PLA) was discussed and justified. Response surface optimization (RSM) methodology and ANOVA analyses were used to establish a decision support strategy for the selection and parameterization of FDM processes. As a result, the microhardness of the surfaces (Top/Bottom) on samples (1 cm3) was measured for different combinations of the 3D printing factors. In fact, the coupling between the physical (structural homogeneity) and mechanical (microhardness) characteristics allowed us to establish a performance index to maximize microhardness while minimizing structural heterogeneity. Optimal factors were identified and discussed using ANOVA analysis and multi-objective optimization for the selection of materials and structures. The originality of this work lies in the coupling of the RSM methodology with the ANOVA analysis in the selection of process parameters for the expected microhardness and structural homogeneity performances. The multi-objective optimization approach revealed the optimal 3D printing conditions: A ZIGZAG filling strategy, a temperature of 230°C for a 4-layer construction with a thickness of 0.2 mm. These combinations of process control factors result in optimal performance in terms of surface microhardness and the homogeneity of the resulting PLA structures.Keywords
All Related Versions
This publication has 34 references indexed in Scilit:
- Tailoring surface roughness through the temporal variation of additive manufacturing process parametersThe International Journal of Advanced Manufacturing Technology, 2024
- Influence of 3D-printing deposition parameters on crystallinity and morphing properties of PLA-based materialsProgress in Additive Manufacturing, 2024
- Shape memory performance assessment of FDM 3D printed PLA-TPU composites by Box-Behnken response surface methodologyThe International Journal of Advanced Manufacturing Technology, 2023
- Investigating the Effect of Processing Parameters on Mechanical Behavior of 3D Fused Deposition Modeling Printed Polylactic AcidJournal of Materials Engineering and Performance, 2022
- Effect of printing parameters and post-process on surface roughness and dimensional deviation of PLA parts fabricated by extrusion-based 3D printingJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2022
- Mechanical Property and Prediction Model for FDM-3D Printed Polylactic Acid (PLA)Arabian Journal for Science and Engineering, 2021
- The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printerThe International Journal of Advanced Manufacturing Technology, 2020
- A review on 3D printed matrix polymer composites: its potential and future challengesThe International Journal of Advanced Manufacturing Technology, 2019
- Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) compositesEuropean Journal of Wood and Wood Products, 2019
- Response Surface Methodology2014