Flax fiber reinforced polylactic acid composites for non-structural engineering applications: Effect of molding temperature and fiber volume fraction on its mechanical properties
- 17 June 2021
- journal article
- research article
- Published by SAGE Publications in Polymers and Polymer Composites
- Vol. 29 (9_suppl) , S780-S789
Abstract
Owing to its biodegradability, durability, low cost and potential material to replace existing commercial products in the field of engineering applications, nowadays there is a lot of interest in the field of green composites. It is formed by a mixture of biodegradable polymers and natural fibers and has a potential to replace synthetic polymer based composites. In this research work flax fibers are used as reinforcement and Poly-lactic acid (PLA) as matrix material for the development of Flax/PLA composites. The effects of processing parameters such as fiber volume fraction ranging from 25% to 50% and molding temperature ranging from 160°C to 180°C on mechanical properties of flax/PLA composites were investigated. It is concluded from the results that maximum tensile and flexural strength are recorded at 35% fiber volume fraction of flax/PLA composites developed at 170°C molding temperature. SEM analysis validated the findings obtained from the mechanical characterization.Keywords
This publication has 17 references indexed in Scilit:
- The effect of surface treatment on the performance of flax/biodegradable compositesComposites Part B: Engineering, 2016
- Study on structural design and analysis of flax natural fiber composite tank manufactured by vacuum assisted resin transfer moldingMaterials Letters, 2014
- Evaluation of mechanical and thermal properties of banana–flax based natural fibre compositeMaterials & Design (1980-2015), 2014
- Tensile Behavior of Nettle Fiber Composites Exposed to Various EnvironmentsJournal of Natural Fibers, 2013
- Effect of pineapple leaf fiber-reinforced thermoplastic starch/poly(lactic acid) green compositeJournal of Thermoplastic Composite Materials, 2013
- Development and characterization of PLA-based green compositesJournal of Thermoplastic Composite Materials, 2012
- PLA Based Biopolymer Reinforced with Natural Fibre: A ReviewJournal of Polymers and the Environment, 2011
- Research on Mechanical Behavior of the Flax/Polyactic Acid CompositesJournal of Reinforced Plastics and Composites, 2010
- Development and effect of alkali treatment on tensile properties of curaua fiber green compositesComposites Part A: Applied Science and Manufacturing, 2007
- ‘Green’ composites Part 2: Characterization of flax yarn and glutaraldehyde/poly(vinyl alcohol) modified soy protein concentrate compositesJournal of Materials Science, 2005