Computer-aided analysis of electronic circuits—the need to include parasitic elements† ‡
Authors:
- 1 November 1977
- journal article
- research article
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 43 (5) , 501-511
Abstract
Models for the fundamental passive electrical components (R, C, L) which include the dominant parasitic elements are shown. Typical values for the parasitic elements are given. A procedure for using computer-aided design (CAD) simulation programmes such as SPICE 1 to estimate the effects of parasitic elements on electronic circuit performance in the HF/VHF region is described. As an example to demonstrate the usefulness of this procedure a linear model was presented for an audio frequency junction field effect transistor (AF JFET) amplifier suitable for RFI analysis at high frequencies. The CAD simulation and the experimental results for the amplifier voltage transfer ratio in the 0.1 to 100 MHz frequency range were observed to be in good agreement when typical parasitic element values were used. By adjusting the initial (typical) parasitic element values, the agreement between calculated and experimental results can be improved.Keywords
This publication has 3 references indexed in Scilit:
- RFI Suppression Components: State of the Art; New DevelopmentsIEEE Transactions on Electromagnetic Compatibility, 1976
- Tools I/Design techniques: Computer-aided design: No longer a mere infant, CAD now offers more sophisticated programs with Monte Carlo computations and tolerance assignmentIEEE Spectrum, 1975
- Chapter 3 The GaAs Field-Effect Transisitor1971