Quantifying Electrochemical Degradation in Single-Crystalline –Graphite Pouch Cells through Operando X-Ray and Postmortem Investigations
Open Access
- 23 January 2024
- journal article
- research article
- Published by American Physical Society (APS) in PRX Energy
- Vol. 3 (1) , 013004
Abstract
Layered nickel-rich lithium transition-metal oxides (; where x ≥ 0.8), with single-crystalline morphology, are promising future high-energy-density -ion battery cathodes due to their ability to mitigate particle-cracking-induced degradation. This is due to the absence of grain boundaries in these materials, which prevents the build-up of bulk crystallographic strain during electrochemical cycling. Compared to their polycrystalline counterparts, there is a need to study single-crystalline -rich cathodes using operando x-ray methods in uncompromised machine-manufactured industrylike full cells to understand their bulk degradation mechanisms as a function of different electrochemical cycling protocols. This can help us identify factors to improve their long-term performance. Here, through in-house operando x-ray studies of pilot-line-built –graphite A7 pouch cells, it is shown that their electrochemical-capacity fade under harsh conditions (2.5–4.4 V and 40 °C for 100 cycles at a C/3 rate) primarily stems from the high-voltage reconstruction of the cathode surface from a layered to a cubic (rock-salt) phase that impedes the kinetics and increases cell impedance. Postmortem electron and x-ray microscopy show that these cathodes can withstand severe anisotropic structural changes and show no cracking when cycled under such conditions. Comparing these results to those from commercial -ion cells with surface-modified single-crystalline -rich cathodes, it is identified that cathode surface passivation can mitigate this type of degradation and prolong cycle life. In addition to furthering our understanding of degradation in single-crystalline -rich cathodes, this work also accentuates the need for practically relevant and reproducible fundamental investigations of -ion cells and presents a methodology for achieving this.
Keywords
Funding Information
- European Synchrotron Radiation Facility
- University of Manchester (ID16A)
- Faraday Institution Research Pouch Cell Manufacture (FIRG062)
- Degradation (FIRG060)
- Faraday Institution FutureCat (FIRG017)
- National Facility in X-Ray CT (EP/T02593X/1)
- Manufacturing by Design (EP/W003333/1)
- European Synchrotron Radiation Facility
- University of Manchester (ID16A)
- Faraday Institution Research Pouch Cell Manufacture (FIRG062)
- Degradation (FIRG060)
- Faraday Institution FutureCat (FIRG017)
- National Facility in X-Ray CT (EP/T02593X/1)
- Manufacturing by Design (EP/W003333/1)
This publication has 70 references indexed in Scilit:
- Cycling Behavior of NCM523/Graphite Lithium-Ion Cells in the 3–4.4 V Range: Diagnostic Studies of Full Cells and Harvested ElectrodesJournal of the Electrochemical Society, 2016
- Fatigue of LiNi0.8Co0.15Al0.05O2 in commercial Li ion batteriesJournal of Power Sources, 2015
- Distinction of impedance responses of Li-ion batteries for individual electrodes using symmetric cellsElectrochimica Acta, 2014
- Nanoscale zoom tomography with hard x rays using Kirkpatrick-Baez opticsApplied Physics Letters, 2007
- ATHENA,ARTEMIS,HEPHAESTUS: data analysis for X-ray absorption spectroscopy usingIFEFFITJournal of Synchrotron Radiation, 2005
- Differential voltage analyses of high-power lithium-ion cellsJournal of Power Sources, 2005
- In Situ X‐Ray Absorption Near‐Edge Structure Evidence for Quadrivalent Nickel in Nickel Battery ElectrodesJournal of the Electrochemical Society, 1996
- Unit-cell refinement from powder diffraction scansJournal of Applied Crystallography, 1981
- A profile refinement method for nuclear and magnetic structuresJournal of Applied Crystallography, 1969
- Line profiles of neutron powder-diffraction peaks for structure refinementActa Crystallographica, 1967