Mechanical Properties and Dimensional Effects of ZnO‐ and SnO 2 ‐Based Varistors
Authors:
- Miguel A. RamírezMRMiguel A. Ramírez
- Miguel AngelMAMiguel Angel
- Fernando Rubio‐MarcosFernando Rubio‐Marcos
- J F FernándezJFJ F Fernández
- José FranciscoJFJosé Francisco
- Markus LengauerMLMarkus Lengauer
- Paulo Roberto BuenoPBPaulo Roberto Bueno
- Elson LongoELElson Longo
- 2 September 2008
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 91 (9) , 3105-3108
Abstract
A comparison between traditional ZnO‐(modified Matsuoka system, [ZnO]) and SnO 2 ‐based varistors (98.9%SnO 2 +1%CoO+0.05%Nb 2 O 5 +0.05%Cr 2 O 3 , [SCNCr]) regarding their mechanical properties, finite element (FE) modeling, and macroscopic response with current pulse is presented in this work. The experimental values of the elastic (static and dynamic) modulus and bending strength are given. Both the static and the dynamic modulus were two times higher for SnO 2 (∼200 GPa) with respect to ZnO (∼100 GPa). A similar behavior was found for the bending strength, confirming the superior mechanical properties of SCNCr associated with a homogeneous microstructure. The finite element analyses yielded the most appropriate thickness/diameter aspect ratio ( H/D ), while thermomechanical stress is minimized. The values of ( H/D ) were lower for the SCNCr in comparison with the ZnO‐based varistors, allowing the production of smaller pieces that can resist the same thermomechanical stress. Finally, preliminary analyses of the macroscopic failures for samples treated with degradation pulses of 8/20‐μs type allowed to confirm the absence of failures due to cracking and/or puncture in the SCNCr. The absence of these failures originates from the good thermomechanical properties.Keywords
This publication has 19 references indexed in Scilit:
- Comparative Electrical Behavior at Low and High Current of SnO 2 ‐ and ZnO‐Based VaristorsJournal of the American Ceramic Society, 2008
- Comparative degradation of ZnO- and SnO2-based polycrystalline non-ohmic devices by current pulse stressJournal of Physics D: Applied Physics, 2008
- Characterization of ZnO-degraded varistors used in high-tension devicesMaterials Research Bulletin, 2007
- Degradación y recuperación de varistores de ZnOBoletín de la Sociedad Española de Cerámica y Vidrio, 2006
- A Comparative Study of Thermal Conductivity in ZnO‐ and SnO2‐Based Varistor SystemsJournal of the American Ceramic Society, 2005
- Mechanical Strength and Microstructure of Zinc Oxide Varistor CeramicsJournal of the American Ceramic Society, 2004
- The dimensional effect of breakdown field in ZnO varistorsJournal of Physics D: Applied Physics, 2002
- Varistor CeramicsJournal of the American Ceramic Society, 1999
- Electrical‐Impulse‐Induced Fracture of Zinc Oxide Varistor CeramicsJournal of the American Ceramic Society, 1997
- Nonohmic Properties of Zinc Oxide CeramicsJapanese Journal of Applied Physics, 1971