Algorithmic Modified Denavit–Hartenberg Modeling for Robotic Manipulators Using Line Geometry
Open Access
- 30 April 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (9) , 4999
Abstract
This paper proposes a kinematic modeling method for robotic manipulators by extracting the modified Denavit–Hartenberg (MDH) parameters using line geometry. For single-branched manipulators, various joint axes can be represented as lines using Plücker coordinates. The forward kinematics is derived by performing the product of matrices which are the exponential maps lifted from two kinds of exponential coordinates using the MDH parameters. For extracting MDH parameters, line geometry systematically analyzes the following: (1) the closest point between a point and line, (2) the closest distance and twist angle between two lines, (3) the common perpendicular line and its intersection points, and (4) classifies line relationships into collinear, distant parallel, intersected, and skewed cases. For each case, five parameters including twist angle, closest distance, common perpendicular direction vector, and both feet on a common perpendicular line are sequentially computed as results of the line geometry block. Finally, the aforementioned line geometry blocks are utilized to extract the four MDH parameters according to their definitions. The effectiveness of the proposed algorithm is verified by four examples including a typical Selective Compliance Assembly Robot Arm (SCARA) robot and three different commercial manipulators.Keywords
Funding Information
- Institute of Civil-Military Technology Cooperation funded by the Defense Acquisition Program Administration and the Ministry of Trade, Industry, and Energy of the Korean government (22-CM-EC-36)
This publication has 18 references indexed in Scilit:
- POE-based kinematic calibration for serial robots using left-invariant error representation and decomposed iterative methodRobotics and Autonomous Systems, 2024
- An Integrated Kinematic Calibration and Dynamic Identification Method With Only Static Measurements for Serial RobotIEEE/ASME Transactions on Mechatronics, 2023
- Automatic Denavit-Hartenberg Parameter Identification for Serial Manipulators2019
- POE-Based Robot Kinematic Calibration Using Axis Configuration Space and the Adjoint Error ModelIEEE Transactions on Robotics, 2016
- A Simple and Systematic Approach to Assigning Denavit–Hartenberg ParametersIEEE Transactions on Robotics, 2007
- Robots and Screw Theory: Applications of Kinematics and Statics to
RoboticsJournal of Mechanical Design, 2004
- Lie-group methodsActa Numerica, 2000
- Improving the absolute positioning accuracy of robot manipulatorsJournal of Robotic Systems, 1985
- The Near-Minimum-Time Control Of Open-Loop Articulated Kinematic ChainsJournal of Dynamic Systems, Measurement, and Control, 1971
- A Kinematic Notation for Lower-Pair Mechanisms Based on MatricesJournal of Applied Mechanics, 1955