Using Green Supplementary Materials to Achieve More Ductile ECC
Open Access
Abstract
To improve the greenness and deformability of engineered cementitious composites (ECC), recycled powder (RP) from construction and demolition waste with an average size of 45 μm and crumb rubber (CR) of two particle sizes (40CR and 80CR) were used as supplements in the mix. In the present study, fly ash and silica sand used in ECC were replaced by RP (50% and 100% by weight) and CR (13% and 30% by weight), respectively. The tension test and compression test demonstrated that RP and CR incorporation has a positive effect on the deformability of ECC, especially on the tensile strain capacity. The highest tensile strain capacity was up to 12%, which is almost 3 times that of the average ECC. The fiber bridging capacity obtained from a single crack tension test and the matrix fracture toughness obtained from 3-point bending were used to analyze the influence of RP and CR at the meso-scale. It is indicated that the replacement of sand by CR lowers the matrix fracture toughness without decreasing the fiber bridging capacity. Accordingly, an explanation was achieved for the exceeding deformability of ECC incorporated with RP and CR based on the pseudo-strain hardening (PSH) index.Keywords
Funding Information
- National Natural Science Foundation of China (51478362,51778461)
This publication has 33 references indexed in Scilit:
- On the tensile resistance of UHPC at impactThe European Physical Journal Special Topics, 2018
- Durability study on engineered cementitious composites (ECC) under sulfate and chloride environmentConstruction and Building Materials, 2017
- First Ultra-High-Performance Fibre-Reinforced Concrete Footbridge in Spain: Design and ConstructionStructural Engineering International, 2014
- Durability of strain-hardening cement-based composites (SHCC)Materials and Structures, 2012
- Chloride Diffusivity in Cracked ConcreteAdvanced Materials Research, 2011
- Water permeability of engineered cementitious compositesCement and Concrete Composites, 2009
- On Engineered Cementitious Composites (ECC)Journal of Advanced Concrete Technology, 2003
- Matrix design for pseudo-strain-hardening fibre reinforced cementitious compositesMaterials and Structures, 1995
- Optimization of ultra-high-performance concrete by the use of a packing modelCement and Concrete Research, 1994
- Steady‐State and Multiple Cracking of Short Random Fiber CompositesJournal of Engineering Mechanics, 1992