Use of Co-Solvents in Hydrothermal Liquefaction (HTL) of Microalgae
Open Access
Abstract
This study reviewed and summarized the literature regarding the use of alcohols during hydrothermal liquefaction (HTL) of algal biomass feedstocks. The use of both pure alcohols and alcohol-water co-solvents were considered. Based upon this review, laboratory experiments were conducted to investigate the impacts of different alcohol co-solvents (ethanol, isopropanol, ethylene glycol, and glycerol) on the HTL treatment of a specific saltwater microalga (Tetraselmis sp.) at two temperatures: 300 °C and 350 °C. Based on their performance, two co-solvents, isopropanol and ethylene glycol, were selected to explore the effects of varying solvent concentrations and reaction temperatures on product yields and biocrude properties. The type and amount of added alcohol did not significantly affect the biocrude yield or composition. Biocrude yields were in the range of 30–35%, while a nearly constant yield of 21% insoluble products was observed, largely resulting from ash constituents within the algal feedstock. The benefits of using alcohol co-solvents (especially isopropanol) were the reduced viscosity of the biocrude products and reduced rates of viscosity increase with biocrude aging. These effects were attributed mainly to the physical properties of the co-solvent mixtures (solubility, polarity, density, etc.) rather than chemical processes. Under the reaction conditions used, there was no evidence that the co-solvents participated in biocrude production by means of hydrogen donation or other chemical processes. Recovery and recycling of the co-solvent present various challenges, depending upon the type and amount of the co-solvent that is used. For example, glycol solvents are recovered nearly completely within the aqueous product stream, whereas simple alcohols are partitioned between the biocrude and aqueous product streams. In commercial applications, the slight benefits provided by the use of co-solvents must be balanced by the challenges of co-solvent recovery and recycling.Keywords
Funding Information
- Qatar National Research Fund (8-646-2-727)
This publication has 66 references indexed in Scilit:
- Liquefaction of sawdust in hot compressed ethanol for the production of bio-oilsProcess Safety and Environmental Protection, 2012
- Enhanced bio-oil production from swine manure co-liquefaction with crude glycerolEnergy Conversion and Management, 2011
- Subcritical hydrothermal liquefaction of cattle manure to bio-oil: Effects of conversion parameters on bio-oil yield and characterization of bio-oilBioresource Technology, 2010
- Highly Efficient Liquefaction of Woody Biomass in Hot-Compressed Alcohol−Water Co-solventsEnergy & Fuels, 2010
- Liquefaction of wood, synthesis and characterization of liquefied wood polyester derivativesJournal of Applied Polymer Science, 2009
- Glycerol as a green solvent for high product yields and selectivitiesEnvironmental Chemistry Letters, 2006
- Comparison of the decomposition behaviors of hardwood and softwood in supercritical methanolJournal of Wood Science, 2003
- Alcell® lignin solubility in ethanol–water mixturesJournal of Applied Polymer Science, 1995
- Solvent effects on liquefaction: Solubilization profiles of a canadian prototype wood, populus deltoides, in the presence of different solventsThe Canadian Journal of Chemical Engineering, 1994
- Hydrogen-donor solvents in biomass liquefactionIndustrial & Engineering Chemistry Process Design and Development, 1985