Formation mechanism of inherent spatial heterogeneity of microstructure and mechanical properties of NiTi SMA prepared by laser directed energy deposition
Authors:
Open Access
- 15 June 2023
- journal article
- research article
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 5 (3) , 035005
Abstract
Ni51Ti49 at.% bulk was additively manufactured by laser-directed energy deposition (DED) to reveal the microstructure evolution, phase distribution, and mechanical properties. It is found that the localized remelting, reheating, and heat accumulation during DED leads to the spatial heterogeneous distribution of columnar crystal and equiaxed crystal, a gradient distribution of Ni4Ti3 precipitates along the building direction, and preferential formation of Ni4Ti3 precipitates in the columnar zone. The austenite transformation finish temperature (A f) varies from −12.65 °C (Z = 33 mm) to 60.35 °C (Z = 10 mm), corresponding to tensile yield strength (σ 0.2) changed from 120 ± 30 MPa to 570 ± 20 MPa, and functional properties changed from shape memory effect to superelasticity at room temperature. The sample in the Z = 20.4 mm height has the best plasticity of 9.6% and the best recoverable strain of 4.2%. This work provided insights and guidelines for the spatial characterization of DEDed NiTi.Keywords
Funding Information
- the Hunan Innovation Platform and Talent Plan (2022RC3033)
- Natural Science Foundation of Shandong Province (ZR2020ZD04)
- Ganzhou Science and Technology Planning Project (Grant no. Ganshikefa[2019]60)
This publication has 49 references indexed in Scilit:
- Manufacturing and processing of NiTi implants: A reviewProgress in Materials Science, 2012
- Influence of Ni on martensitic phase transformations in NiTi shape memory alloysActa Materialia, 2010
- Fabrication of porous NiTi shape memory alloy structures using laser engineered net shapingJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2008
- Effect of ageing treatment on the transformation behaviour of Ti–50.9at.% Ni alloyActa Materialia, 2008
- A novel approach to fabricate uni-directional and branching slender structures using laser-based direct metal depositionInternational Journal of Machine Tools and Manufacture, 2007
- Elementary martensitic transformation processes in Ni-rich NiTi single crystals with Ni4Ti3 precipitatesActa Materialia, 2006
- Origin of 2-stage R-phase transformation in low-temperature aged Ni-rich Ti–Ni alloysActa Materialia, 2005
- Physical metallurgy of Ti–Ni-based shape memory alloysProgress in Materials Science, 2005
- Ni4Ti3-precipitation during aging of NiTi shape memory alloys and its influence on martensitic phase transformationsActa Materialia, 2002
- Corrigendum to “The role of texture in tension–compression asymmetry in polycrystalline NiTi” [International Journal of Plasticity 15 (1999) 69–92]International Journal of Plasticity, 1999