The effect of pulsed jet lavage in vertebroplasty on injection forces of PMMA bone cement: an animal study
Authors:
- 1 July 2009
- journal article
- research article
- Published by Springer Nature in European Spine Journal
- Vol. 18 (12) , 1957-1962
Abstract
Percutaneous vertebroplasty, comprising of the injection of polymethylmethacrylate (PMMA) into vertebral bodies, is an efficient procedure to stabilize osteoporotic compression fractures as well as other weakening lesions. Besides fat embolism, cement leakage is considered to be one of the major and most severe complications during percutaneous vertebroplasty. The viscosity of the PMMA during injection plays a key role in this context. It was shown in vitro that the best way to lower the risk of cement leakage is to inject the cement at higher viscosity, which is requires high injection forces. Injection forces can be reduced by applying a newly developed lavage technique as it was shown in vitro using human cadaver vertebrae. The purpose of this study was to prove the in vitro results in an in vivo model. The investigation was incorporated in an animal study that was performed to evaluate the cardiovascular reaction on cement augmentation using the lavage technique. Injection forces were measured with instrumentation for 1 cc syringes, additionally acquiring plunger displacement. Averaged injection forces measured, ranged from 12 to 130 N and from 28 to 140 N for the lavage group and the control group, respectively. Normalized injection forces (by viscosity and injection speed) showed a trend to be lower for the lavage group in comparison to the control group (P = 0.073). In conclusion, the clinical relevance on the investigated lavage technique concerning lowering injection forces was only shown by trend in the performed animal study. However, it might well be that the effect is more pronounced for osteoporotic vertebral bodies.Keywords
This publication has 28 references indexed in Scilit:
- National trends in vertebral augmentation procedures for the treatment of vertebral compression fracturesSurgical Neurology, 2009
- A sheep model for fracture treatment in osteoporosis: Benefits of the model versus animal welfareLaboratory Animals, 2008
- Effects of Facetectomy and Crosslink Augmentation on Motion Segment Flexibility in Posterior Lumbar Interbody FusionSpine, 2008
- Adjacent vertebral failure after vertebroplasty: a biomechanical study of low-modulus PMMA cementEuropean Spine Journal, 2007
- High-Viscosity Cement Significantly Enhances Uniformity of Cement Filling in Vertebroplasty: An Experimental Model and Study on Cement LeakageSpine, 2006
- Vertebroplasty and Kyphoplasty: A Systematic Review of 69 Clinical StudiesSpine, 2006
- Biomechanical changes after the augmentation of experimental osteoporotic vertebral compression fractures in the cadaveric thoracic spineThe Spine Journal, 2005
- The current treatment—a survey of osteoporotic fracture treatment. Osteoporotic spine fractures: the spine surgeon’s perspectiveOsteoporosis International, 2004
- An in vitro biomechanical evaluation of bone cements used in percutaneous vertebroplastyBone, 1999
- Interspecies Differences in Bone Composition, Density, and Quality: Potential Implications for in Vivo Bone Research*Endocrinology, 1998