Enhancement of the Mechanical and Tribological Properties of Aluminum-Based Alloys Fabricated by SPS and Alloyed with Mo and Cr
Authors:
- Sergey N. GrigorievSergey N. Grigoriev
- Alexander MironovAMAlexander Mironov
- Ekaterina KuznetsovaEKEkaterina Kuznetsova
- Yuri PristinskiyYPYuri Pristinskiy
- Pavel PodrabinnikPPPavel Podrabinnik
- Nestor Washington Solís PinargoteNestor Washington Solís Pinargote
- Iosif GershmanIosif Gershman
- Pavel PeretyaginPPPavel Peretyagin
- Anton SmirnovASAnton Smirnov
Open Access
Abstract
Multicomponent aluminum-based alloys doped with chromium (Cr) and molybdenum (Mo), fabricated by spark plasma sintering (SPS), derived from a powder mixture prepared by mechanical alloying, were studied in this work. The morphology of the pristine and worn surfaces was analyzed using a scanning electron microscope equipped with an energy-dispersive X-ray spectroscopy system. The obtained alloys exhibited higher hardness (73 and 72) for the Al–Mo and Al–Cr alloys, respectively, compared to reference bronze. Besides improved hardness, SPS-sintered alloys also showed a lower value of the weight and linear wear and the highest score-resistance compared to bronze. The enhanced tribological behavior is related to the formation of secondary structures on the friction surfaces of rubbing pairs, which in turn reduce wear. For the first time, the present research has demonstrated the effectiveness of the addition of Mo and Cr for the fabrication of sintered multicomponent Al-based alloys with a tailored microstructure that induces the formation of secondary structures on the tribosurfaces due to the self-organization processes during friction.Keywords
This publication has 49 references indexed in Scilit:
- Cyclic Fatigue Life‐ and Crack‐Growth Behavior of Zirconia–Niobium CompositesJournal of the American Ceramic Society, 2013
- Microstructural examination and properties of premixed Al–Cu–Mg powder metallurgy alloyMaterials Characterization, 2011
- Effect of graphite and transition elements (Cu, Ni) on high temperature tensile behaviour of Al–Si AlloysMaterials Chemistry and Physics, 2011
- Microstructures and compressive properties of multicomponent AlCoCrFeNiMox alloysMaterials Science and Engineering: A, 2010
- Self-Organization during Friction in Complex Surface Engineered TribosystemsEntropy, 2010
- Effect of Sn content on the structural and mechanical properties of Al–Si alloyMaterials Science and Engineering: A, 2010
- Microstructure and mechanical properties of nanocrystalline high strength Al–Mg–Si (AA6061) alloy by high energy ball milling and spark plasma sinteringMaterials Science and Engineering: A, 2009
- Thermally induced structural and mechanical variations in ternary Al–Si based alloysMaterials Science and Engineering: A, 2009
- Hot roll bonding of Al–Pb-bearing alloy strips and steel sheets using an aluminized interlayerMaterials Characterization, 2001
- Study on crystallization and microstructure for new series of Al–Sn–Si alloysMaterials Science and Engineering: A, 2000