Mechanical properties of adhesive bonds reinforced with biological fabric
- 9 February 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 31 (17) , 1859-1871
Abstract
The paper deals with the utilization of a biological reinforcement in an area of an adhesive layer. An advantage of the biological reinforcement application is a simplification of following recyclation of adhesive bonds comparing to those with carbon and glass fibre based reinforcements. Biocomposites combining the biological reinforcement with an inorganic adhesive can be used in the area of connecting materials by means of the adhesive bonding technology. This study was focused on the analysis of an adhesive bond strength when the bonds were reinforced with biological fabric such as jute, flax and cotton. It evaluates the quality of the adhesive layer by means of SEM. The aim of this experiment was to describe an influence of the biological reinforcement in the form of fabric on the adhesive bond strength loaded with various loading speeds from 0.5 to 300 mm/min. The experimental part is devoted to the research on the influence of added fabrics of the natural origin on the shear strength of the adhesive bond which is prepared with the polymer adhesive. The experiment results proved a benefit of the reinforcing biological fabric in the layer of the adhesive. The reinforcement of the adhesive bond with the layer of the flax and the cotton showed in the positive way with the increase of the adhesive bond strength up of ca. 50%. The biological reinforcement was not fully wetted with the resin which did not considerably influence the adhesive bond strength.Keywords
Funding Information
- Internal grant agency of Faculty of Engineering, Czech University of Life Sciences Prague (2016:31140/1312/3109)
This publication has 22 references indexed in Scilit:
- Surface modification of plant fibers using environment friendly methods for their application in polymer composites, textile industry and antimicrobial activities: A reviewJournal of Environmental Chemical Engineering, 2013
- Mixed-mode fracture of adhesively bonded metallic joints under quasi-static loadingEngineering Fracture Mechanics, 2010
- Tensile behavior of high performance natural (sisal) fibersComposites Science and Technology, 2008
- Environmentally Sustainable Fibers from Regenerated ProteinBiomacromolecules, 2008
- Influence of adhesive thickness and filler content on the mechanical performance of aluminum single-lap joints bonded with aluminum powder filled epoxy adhesiveJournal of Materials Processing Technology, 2008
- Characterization of the morphological, physical, and mechanical properties of seven nonwood plant fiber bundlesJournal of Wood Science, 2007
- The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 – polyester resin matrixComposites Science and Technology, 2004
- Natural fibres: can they replace glass in fibre reinforced plastics?Composites Science and Technology, 2003
- Self-reinforced melt processable composites of sisalComposites Science and Technology, 2003
- Fracture and impact behaviours of hollow micro-sphere/epoxy resin compositesComposites Part A: Applied Science and Manufacturing, 2001