Modeling RP-1 fuel advanced distillation data using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry and partial least squares analysis
- 15 October 2014
- journal article
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 407 (1) , 321-330
Abstract
Recent efforts in predicting rocket propulsion (RP-1) fuel performance through modeling put greater emphasis on obtaining detailed and accurate fuel properties, as well as elucidating the relationships between fuel compositions and their properties. Herein, we study multidimensional chromatographic data obtained by comprehensive two-dimensional gas chromatography combined with time-of-flight mass spectrometry (GC × GC–TOFMS) to analyze RP-1 fuels. For GC × GC separations, RTX-Wax (polar stationary phase) and RTX-1 (non-polar stationary phase) columns were implemented for the primary and secondary dimensions, respectively, to separate the chemical compound classes (alkanes, cycloalkanes, aromatics, etc.), providing a significant level of chemical compositional information. The GC × GC–TOFMS data were analyzed using partial least squares regression (PLS) chemometric analysis to model and predict advanced distillation curve (ADC) data for ten RP-1 fuels that were previously analyzed using the ADC method. The PLS modeling provides insight into the chemical species that impact the ADC data. The PLS modeling correlates compositional information found in the GC × GC–TOFMS chromatograms of each RP-1 fuel, and their respective ADC, and allows prediction of the ADC for each RP-1 fuel with good precision and accuracy. The root-mean-square error of calibration (RMSEC) ranged from 0.1 to 0.5 °C, and was typically below ∼0.2 °C, for the PLS calibration of the ADC modeling with GC × GC–TOFMS data, indicating a good fit of the model to the calibration data. Likewise, the predictive power of the overall method via PLS modeling was assessed using leave-one-out cross-validation (LOOCV) yielding root-mean-square error of cross-validation (RMSECV) ranging from 1.4 to 2.6 °C, and was typically below ∼2.0 °C, at each % distilled measurement point during the ADC analysis. Graphical AbstractKeywords
This publication has 43 references indexed in Scilit:
- Analysis of Marine Diesel Fuel with the Advanced Distillation Curve MethodEnergy & Fuels, 2013
- Composition-Explicit Distillation Curves of Alternative Turbine FuelsEnergy & Fuels, 2012
- Application of the Advanced Distillation Curve Method to the Variability of Jet FuelsEnergy & Fuels, 2012
- Automated Method for Determining Hydrocarbon Distributions in Mobility FuelsEnergy & Fuels, 2011
- Assessment of the Compositional Variability of RP-1 and RP-2 with the Advanced Distillation Curve ApproachEnergy & Fuels, 2010
- Extent and Impacts of Hydrocarbon Fuel Compositional Variability for Aerospace Propulsion Systems2010
- Complex Fluid Analysis with the Advanced Distillation Curve ApproachAnalytical Chemistry, 2009
- Improvements in the Measurement of Distillation Curves. 2. Application to Aerospace/Aviation Fuels RP-1 and S-8Industrial & Engineering Chemistry Research, 2006
- Improvements in the Measurement of Distillation Curves. 1. A Composition-Explicit ApproachIndustrial & Engineering Chemistry Research, 2006
- Chemical Fingerprinting of Petroleum Biomarkers Using Time Warping and PCAEnvironmental Science & Technology, 2004