Swing Characteristics and Vibration Feature of Tower Cranes under Compound Working Condition
Authors:
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Abstract
The swing behaviour of tower cranes under compound working conditions is closely related to construction safety and structural health. This paper presents dynamic models and simulated them for parameter analysis to understand tower cranes’ dynamic characteristics and vibration features under compound working conditions. The parameters contain payload mass, rope length, lifting acceleration, slewing acceleration, luffing acceleration, and initial angle. For the lifting‐luffing coupling motion (LLCM) and lifting‐slewing coupling motion (LSCM) of the tower crane, the D’Alembert principle provides a theoretical basis for the derivation of system dynamics equations. The spatial swing angle description of the crane payload includes the time‐domain response and frequency‐domain response, which uses a dynamic model. The result shows that the mass has little effect on the spatial swing angle. The value of the lifting acceleration is stable at 0.004 m/s2 to 0.01 m/s2. Peak value (PV), root mean square value (RMS), root mean square frequency (RMSF), and frequency standard deviation (RVF) present the best sensitivity to changes in the spatial swing angle response. When PV of angles θ and β increases by tens of thousands of times in the LLCM, PV can reflect the phenomenon of angle divergence. The skewness value (SV) increases by 3422% at the severe swing angle performance in the LSCM. The swing angle regularity with the compound working conditions can provide theoretical guidance for eliminating structural vibration.Keywords
This publication has 27 references indexed in Scilit:
- Modelling and Control of an Overhead Crane System with a Flexible Cable and Large Swing AngleJournal of Low Frequency Noise, Vibration and Active Control, 2014
- Swing angle estimation for anti-sway overhead crane control using load cellInternational Journal of Control, Automation, and Systems, 2011
- Tracking and anti-sway control for boom cranesControl Engineering Practice, 2009
- A study of the horizontal inertial forces acting on the suspended load of slewing cranesInternational Journal of Mechanical Sciences, 2008
- Dynamic responses of hydraulic crane during luffing motionMechanism and Machine Theory, 2006
- Dynamic Analysis of Tower CranesJournal of Engineering Mechanics, 2005
- Erratum to “On the dynamics of cranes, or spherical pendula with moving supports” [Int. J. Non-Linear Mech. 37 (2002) 1211]International Journal of Non-Linear Mechanics, 2003
- EXPERIMENTAL INVESTIGATION OF BEAM-TIP MASS AND PENDULUM SYSTEM UNDER RANDOM EXCITATIONMechanical Systems and Signal Processing, 2002
- DYNAMICS OF A THREE-DIMENSIONAL OVERHEAD CRANE SYSTEMJournal of Sound and Vibration, 2001
- Nonlinear Dynamics of a Boom CraneJournal of Vibration and Control, 2001