Effect of Superstructure Materials and Misfit on Stress Distribution in a Single Implant-Supported Prosthesis
Authors:
- Wirley Gonçalves AssunçãoWAWirley Gonçalves Assunção
- Érica Alves GomesÉGÉrica Alves Gomes
- Valentim Adelino Ricardo BarãoVBValentim Adelino Ricardo Barão
- Juliana Aparecida DelbenJDJuliana Aparecida Delben
- Lucas Fernando TabataLTLucas Fernando Tabata
- Edson Antonio Capello de SousaESEdson Antonio Capello de Sousa
- 1 May 2010
- journal article
- research article
- Published by Wolters Kluwer Health in Journal of Craniofacial Surgery
- Vol. 21 (3) , 689-695
Abstract
This finite element analysis study evaluated the optimal material combination for the superstructure of single implant-supported prosthesis with different fit patterns. Two models of a two-dimensional finite element analysis were constructed: group A (control), prosthesis presenting precise fit to implant; and group B, prostheses with unilateral angular misfit of 100 microm. Each group was divided into 5 subgroups according to different materials for framework (gold alloy, titanium, and zirconia) and veneering (porcelain and modified composite resin). Evaluation was performed on ANSYS software with 133-N load applied at the opposite side of misfit on the model. The load was applied with a 30-degree angulation and 2-mm off-axis. The presence of unilateral angular misfit (group B) increased the von Mises stresses in the implant (40%) and retention screw (7%) in comparison to group A. The combination of porcelain/titanium and porcelain/zirconia displayed more favorable stress distribution. When gold alloy was used as a framework material, there was no difference in stress values for both veneering materials in all groups. The use of stiffer and softer superstructures materials did not affect the stress distribution and stress values in the supporting tissue. According to the biomechanical point of view, materials with high elasticity modulus are more suitable for the superstructure of implant-supported prosthesis.Keywords
This publication has 24 references indexed in Scilit:
- Effect of Misfit on Preload Maintenance of Retention Screws of Implant-Supported ProsthesesJournal of Materials Engineering and Performance, 2009
- The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental studyClinical Oral Implants Research, 2001
- Bone Response to Implant‐Supported Frameworks with Differing Degrees of Misfit Preload: In Vivo Study in RabbitsClinical Implant Dentistry and Related Research, 2000
- Clinical complications of osseointegrated implantsThe Journal of Prosthetic Dentistry, 1999
- The fit of cast and premachined implant abutmentsThe Journal of Prosthetic Dentistry, 1998
- Accuracy of implant‐supported prostheses in the edentulous jaw. Analysis of precision of fit between cast gold‐alloy frameworks and master casts by means of a three‐dimensional photogrammetric technique.Clinical Oral Implants Research, 1995
- Photogrammetric measurements of implant positions. Description of a technique to determine the fit between implants and superstructures.Clinical Oral Implants Research, 1994
- A Measurement of Torque Values Obtained With Hand‐Held Drivers in a Simulated Clinical SettingJournal of Prosthodontics, 1993
- The longitudinal clinical effectiveness of osseointegrated dental implants: The Toronto study. Part III: Problems and complications encounteredThe Journal of Prosthetic Dentistry, 1990
- Biomechanical considerations in osseointegrated prosthesesThe Journal of Prosthetic Dentistry, 1983