Performance of long Canadian natural fibers as reinforcements in polymers
- 9 August 2010
- journal article
- other
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 29 (21) , 3197-3207
Abstract
Fiber morphology has a significant effect on the mechanical properties of fiber/polymer composites. The performance of nine types of long wood fibers (initial aspect ratio of >40), two long agricultural fibers (initial aspect ratio of >40), and one short fiber wood flour (initial aspect ratio of = 5—10) are compared. The fibers were compounded in polypropylene in a Brabender mixer and subsequently injection molded. The longer natural fibers (both wood fibers and agricultural fibers) did not provide significant additional reinforcement when compared to the wood flour. The fibers were extracted from the final specimens and measured using a Fiber Quality Analyzer. They were found to be severely degraded by processing, while the wood flour morphology was only slightly modified. The degree of length degradation was found to be dependent on fiber strength.Keywords
This publication has 19 references indexed in Scilit:
- Injection‐molded short hemp fiber/glass fiber‐reinforced polypropylene hybrid composites—Mechanical, water absorption and thermal propertiesJournal of Applied Polymer Science, 2006
- Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic compositesBioresource Technology, 2006
- Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite ProductsJournal of Reinforced Plastics and Composites, 2005
- Effect of coupling agents on rice‐husk‐filled HDPE extruded profilesPolymer International, 2004
- Sheet‐Molded Polyolefin Natural Fiber Composites for Automotive ApplicationsMacromolecular Materials and Engineering, 2003
- High Stiffness Natural Fiber‐Reinforced Hybrid Polypropylene CompositesPolymer-Plastics Technology and Engineering, 2003
- Improved Acoustic Behavior of Interior Parts of Renewable Resources in the Automotive IndustryJournal of Polymers and the Environment, 2002
- Composites reinforced with cellulose based fibresProgress in Polymer Science, 1999
- The influence of fiber-surface treatment on the mechanical properties of jute-polypropylene compositesComposites Part A: Applied Science and Manufacturing, 1997
- Effect of solid–state modified polypropylene on the physical performance of sawdust–filled polypropylene compositesAdvances in Polymer Technology, 1993