The mechanical and thermal behaviors of glass bead filled polypropylene
- 29 June 2004
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 15 (7) , 409-413
Abstract
Notch Izod impact strength of poly(propylene) (PP)/glass bead blends was studied as a function of temperature. The results indicated that the toughness for various blends could undergo a brittle‐ductile transition (BDT) with increasing temperature. The BDT temperature (TBD) decreased with increasing glass bead content. Introducing the interparticle distance (ID) concept into the study, it was found that the critical interparticle distance (IDc) reduced with increasing test temperature correspondingly. The static tensile tests showed that the Young's modulus of the blends decreased slightly first and thereafter increased with increasing glass bead content. However, the yield stress decreased considerably with the increase in glass bead content. Dynamic mechanical analysis (DMA) measurements revealed that the heat‐deflection temperature of the PP could be much improved by the incorporation of glass beads. Moreover, the glass transition temperature (Tg) increased obviously with increasing glass beads content. Differential scanning calorimetry (DSC) results implied that the addition of glass beads could change the crystallinity as well as the melting temperature of the PP slightly. Thermogravimetric analysis (TGA) measurements implied that the decomposition temperature of the blend could be much improved by the incorporation of glass beads. Copyright © 2004 John Wiley & Sons, Ltd.Keywords
This publication has 35 references indexed in Scilit:
- The effect of particle–matrix adhesion on the mechanical behavior of glass filled epoxies: Part 1. A study on yield behavior and cohesive strengthPolymer, 2003
- Toughening of polypropylene with calcium carbonate particlesPolymer, 2003
- Brittle–ductile transition in high‐density polyethylene/glass‐bead blends: Effects of interparticle distance and temperatureJournal of Polymer Science Part B: Polymer Physics, 2001
- Brittle–ductile transition in polypropylene filled with glass beadsPolymer, 1999
- Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and temperaturePolymer, 1998
- Fracture and impact strength of poly(vinyl chloride)/methyl methacrylate/butadiene/styrene polymer blendsPolymer Engineering & Science, 1997
- Polyethylene toughened by CaCO3 particle: Brittle‐ductile transition of CaCO3‐toughened HDPEJournal of Applied Polymer Science, 1993
- Mechanical properties of polypropylene filled with calcium carbonatePolymer Engineering & Science, 1985
- Reduction of notch sensitivity and improvement in low‐temperature impact strength of PVCJournal of Vinyl and Additive Technology, 1982
- Stress‐strain behavior of styrene‐acrylonitrile/glass bead composites in the glassy regionPolymer Engineering & Science, 1971