Methodology for determining design rules for helical channels in glass components produced by selective laser sintering
- 12 April 2021
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 18 (5) , 1751-1763
Abstract
The ability to accurately produce geometric features is one of the main hurdles in advancing additive manufacturing for the production of functional parts. Design rules can be found for parts produced using selective laser sintering for polymers with simple features such as thin walls and through‐holes; however, these rules have not been studied for more complex features such as helical channels produced from glass or ceramic materials. In this study, feature resolution for helical channels is quantified for successful production of both green and final parts after debinding and sintering. We found the ability to clear loose powder was a major factor in determining whether a particular channel/part geometry could be produced. Our experiments suggest a linear relationship between the scaled diameter and tortuosity for successful clearing of channels. Using this, we propose a design rule that can predict success and failure in accurately forming internal helical channels. The proposed methodology was experimentally validated for parts created via indirect selective laser sintering from mixtures of glass and nylon powders.Keywords
Funding Information
- L3Harris Technologies
This publication has 8 references indexed in Scilit:
- Additive Manufacturing Review: Early Past to Current PracticeJournal of Manufacturing Science and Engineering, 2020
- A Test Part for Evaluating the Accuracy and Resolution of a Polymer Powder Bed Fusion ProcessJournal of Mechanical Design, 2017
- Shaping ceramics through indirect selective laser sinteringRapid Prototyping Journal, 2016
- On design for additive manufacturing: evaluating geometrical limitationsRapid Prototyping Journal, 2015
- Design and subsystem development of a high temperature selective laser sintering machine for enhanced process monitoring and controlAdditive Manufacturing, 2015
- Additive manufacturing of alumina parts by indirect selective laser sintering and post processingJournal of Materials Processing Technology, 2013
- Indirect selective laser sintering of apatite—wollostonite glass—ceramicProceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2008
- Global Model for Calculating Room‐Temperature Glass Density from the CompositionJournal of the American Ceramic Society, 2007