Research on the flexural performance of reinforced engineered cementitious composite beams
Authors:
- 23 August 2021
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 23 (4) , 2198-2220
Abstract
The bending performance of polypropylene fiber reinforced engineered cementitious composite (PP‐ECC) beams was studied. A total of five reinforced concrete (RC) beams were prepared and tested. The test variables include matrix type, longitudinal reinforcement diameter, and longitudinal reinforcement ratio. The study found that ECC is an ideal building material to improve the bending performance of RC beams. For the failure mode, even if the ultimate load is reached, no local cracks are observed in the ECC beam. On the contrary, due to the high ductility of the ECC material, multiple microcracks appear in the tension zone of the beam. From the perspective of bending performance, the use of ECC materials as the matrix of RC beams can not only increase the cracking load, yield load, and ultimate load of RC beams but also increase its ductility and energy absorption capacity. A method for predicting the flexural bearing capacity of ECC beams considering the effect of fiber tensile stress is proposed. The experimental data in this study are compared with the experimental data in the previous literature, and the prediction results of this model and other previous models are obtained. The average ratio of the predicted value of the flexural bearing capacity of the RC beam to the experimental value is 0.979, and the coefficient of variation is 0.016.Keywords
This publication has 49 references indexed in Scilit:
- A review: Self-healing in cementitious materials and engineered cementitious composite as a self-healing materialConstruction and Building Materials, 2012
- Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretesConstruction and Building Materials, 2011
- Water permeability of engineered cementitious compositesCement and Concrete Composites, 2009
- Material characteristics of high performance lightweight concrete reinforced with PVAConstruction and Building Materials, 2008
- Controlling fracture toughness of matrix with mica flake inclusions to design pseudo-ductile fibre reinforced cementitious compositesEngineering Fracture Mechanics, 2007
- Bond behaviour and flexural performance of structural synthetic fibre-reinforced concreteMagazine of Concrete Research, 2006
- Recent Progress on HPFRCC in Japan Required Performance and ApplicationsJournal of Advanced Concrete Technology, 2006
- Multiple Cracking and Fiber Bridging Characteristics of Engineered Cementitious Composites under Fatigue FlexureJournal of Materials in Civil Engineering, 2004
- On Engineered Cementitious Composites (ECC)Journal of Advanced Concrete Technology, 2003
- INNOVATIONS FORUM : Engineered Cementitious Composites for Structural ApplicationsJournal of Materials in Civil Engineering, 1998