A kinematic calibration method based on the product of exponentials formula for serial robot using position measurements
- 1 April 2014
- journal article
- research article
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 33 (6) , 1295-1313
Abstract
SUMMARY: Based on product of exponentials (POE) formula, three explicit error models are given in this paper for kinematic calibration of serial robot through measuring its end-effector positions. To obtain these error models, the tool frame should be chosen as reference frame at first, and then each position–error-related segment in the error models using pose measurement should be selected. And during kinematic parameter identification, all the errors in joint twists are identifiable, and the initial transformation errors and the joint zero-position errors can be identified conditionally. Namely, the initial transformation errors are identifiable if they do not contain orientation errors. And the joint zero-position errors are identifiable when a robot only consists of prismatic joints and the coordinates of its joint twists are linearly independent.The effectiveness of this calibration method has been validated by simulations and experiments. The results show that: (1) the identification algorithms are robust and practical. (2) The method of position measurement is superior to that of pose measurement.Keywords
This publication has 20 references indexed in Scilit:
- Local POE model for robot kinematic calibrationMechanism and Machine Theory, 2001
- A technique for the independent-axis calibration of robot manipulators with experimental verificationInternational Journal of Computer Integrated Manufacturing, 2001
- New closed-form solution for kinematic parameter identification of a binocular head using point measurementsIEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 1998
- Complete, minimal and model-continuous kinematic models for robot calibrationRobotics and Computer-Integrated Manufacturing, 1997
- Kinematic calibration using the product of exponentials formulaRobotica, 1996
- Robot calibration using the CPC error modelRobotics and Computer-Integrated Manufacturing, 1992
- Robot calibration—Method and resultsRobotics and Computer-Integrated Manufacturing, 1991
- Identifiable Parameters and Optimum Configurations for Robots CalibrationRobotica, 1991
- Improving the absolute positioning accuracy of robot manipulatorsJournal of Robotic Systems, 1985
- A Kinematic CAD Tool for the Design and Control of a Robot ManipulatorThe International Journal of Robotics Research, 1984