A study of processing and parametric optimization of wear-resistant AZ91-TiB 2 composite fabricated by ultrasonic-assisted stir casting process
Authors:
- 25 May 2022
- journal article
- research article
- Published by IOP Publishing in Surface Topography: Metrology and Properties
- Vol. 10 (2) , 025024
Abstract
In the present research, a lightweight and wear-resistant TiB 2 reinforced AZ91D Mg metal matrix composite was developed using an ultrasonic-assisted stir casting process for aerospace and automobile applications. Stirrer speed, ultrasonic power, and TiB 2 reinforcement concentration were considered the input process parameters, which were optimized with the help of Taguchi’s L 9 orthogonal array, followed by grey relational analysis to develop the composite with high hardness and wear resistance. Pin-on-disc sliding wear testing was conducted to evaluate the wear resistance of the composites fabricated at different process parameter settings. SEM, EDS, and XRD examined the microstructure, wear mechanisms, elemental composition, and different phases in the developed composites. The microhardness of the specimens was determined using a Vickers microhardness tester. The results revealed that the process parameter setting with a stirrer speed of 400 rpm, 1500 W of ultrasonic power, and 3 wt% of TiB 2 reinforcement concentration had the highest grey relational grade, which resulted in the development of a composite material exhibiting the high microhardness and minimum wear. The microstructural investigation revealed that the ultrasonic agitation of the liquid melt resulted in nearly uniform dispersion of the TiB 2 reinforcement particulates in the composite. During the sliding wear test, the material removal in the composite specimens occurred due to the adhesion, oxidation, delamination, pull-out of reinforcement particles, and eruption of the Mg alloy matrix.Keywords
This publication has 38 references indexed in Scilit:
- Microstructural evolution in ultrasonically processed in situ AZ91 matrix composites and their mechanical and wear behaviorMaterials & Design (1980-2015), 2014
- Influence of B4C on the tribological and mechanical properties of Al 7075–B4C compositesComposites Part B: Engineering, 2013
- Tribological Behavior of Novel Hybrid Composite Materials Using Taguchi TechniqueJournal of Tribology, 2013
- Assessing the life cycle costs and environmental performance of lightweight materials in automobile applicationsComposites Part A: Applied Science and Manufacturing, 2011
- Effects of ultrasonic treatment on microstructure and tensile strength of AZ91 magnesium alloyJournal of Alloys and Compounds, 2011
- Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting processMaterials Science and Engineering: A, 2007
- Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi methodThe International Journal of Advanced Manufacturing Technology, 2007
- Fabrication of TiB2 particulate reinforced magnesium matrix composites by two-step processing methodMaterials Letters, 2006
- MagnesiumMaterials Science and Engineering: A, 2001
- Material properties of titanium diborideJournal of Research of the National Institute of Standards and Technology, 2000