Abstract
Water filtration membranes produced sustainably through microbial cellulose production can have filtration properties altered through facile chemical treatments. Microbial cellulose is an effective membrane filtration medium, and pristine microbial membranes can serve as ultrafiltration membranes with a permeability of 143 L m−2h−1bar−1 and a particle size cut off of 35 nm. As living biofilms, these membranes consist of microbial cellulose, bacteria, and extracellular polymers. Thus, additional biofilm components may reduce the intrinsic permeability of the cellulose. Here, microbial membranes were treated with hydrogen peroxide (H2O2) and sodium hypochlorite (NaOCl, liquid bleach) to remove impurities present in microbial cellulose and increase membrane permeability. For example, permeability increased from 143 to 257 L m 2h-1bar-1 with treatment by 0.3% H2O2 for 12 min. Membranes were also treated with sodium hydroxide (NaOH) to increase membrane selectivity, and the particle size cut off was reduced from 35 to 10 nm post-treatment by 0.8% NaOH or 20 min. Scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), contact angle goniometry, and X-ray diffraction (XRD) were used to characterize the physical and chemical properties of the membrane matrix. Facile chemical treatments provide a significant degree of flexibility to tailor microbial membranes to meet specific needs. Microbial membrane production is inherently accessible, and this study furthers that accessibility by utilizing only readily-available components to treat microbial membranes and expand their potential applications.
Funding Information
  • National Science Foundation (OIA- 1757351)
  • Montana Tech Seed Grant
  • Combat Capabilities Development Command Army Research Laboratory (W911NF-15-2-0020)

This publication has 23 references indexed in Scilit: