The Influence of Injection Parameters on Diesel Spray Characteristics
Authors:
- Jean ArrègleJAJean Arrègle
- José V. PastorJPJosé V. Pastor
- Santiago RuizSRSantiago Ruiz
- 1 March 1999
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This paper has the objective of characterising the macro and microscopic behaviour of Diesel sprays generated by a common-rail system and quantifying the influence of injection parameters and boundary conditions through a broad experimental study. The main purpose of this research is to validate and extend the different correlations available in the literature to the case of sprays generated by common-rail systems, i.e. at high injection pressures with small nozzle holes. The sprays are characterised in an environment which simulates the in-cylinder air density existing in the real engine when the injection starts. However, it should be pointed out that isothermal conditions at room temperature are considered and very little evaporation occurs. A wide parametric study has generated evidence needed to quantify the influence of the common-rail pressure, nozzle hole diameter and environment gas density on the spray tip penetration, spray cone angle and geometric volume of the spray, as well as the spatial and temporal evolution of drop size distribution. A theoretical analysis is made, and the results obtained are compared with the experiments of both this study and with those of the bibliography.Keywords
This publication has 14 references indexed in Scilit:
- Influence of the Fuel Characteristics on the Injection Process in a D.I. Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 1998
- Characterization of Local Fuel Concentrations and Internal Dynamics in D.I. Diesel SpraysSAE International Journal of Advances and Current Practices in Mobility, 1997
- Characterization of D.I. Diesel Sprays in High Density ConditionsSAE International Journal of Advances and Current Practices in Mobility, 1996
- Structures of Fuel Sprays in Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 1990
- Mechanism of atomization of a liquid jetThe Physics of Fluids, 1982
- Investigation on the Characteristics of Diesel Fuel SpraySAE International Journal of Advances and Current Practices in Mobility, 1980
- On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating ConditionsSAE International Journal of Advances and Current Practices in Mobility, 1979
- Fuel Droplet Size Distribution in Diesel Combustion ChamberSAE International Journal of Advances and Current Practices in Mobility, 1974
- A Basis for the Comparison of Various Experimental Methods for Studying Spray PenetrationSAE International Journal of Advances and Current Practices in Mobility, 1971
- Some experiments on orifice spraysThe Canadian Journal of Chemical Engineering, 1958