A micro-cantilever sensor chip based on contact angle analysis for a label-free troponin I immunoassay
- 1 January 2013
- journal article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 13 (5) , 834-842
Abstract
Cantilever sensors have been extensively explored as a promising technique for real-time and label-free analyses in biological systems. A major sensing principle utilized by state-of-the-art cantilever sensors is based on analyte-induced surface stress changes, which result in static bending of a cantilever. The sensor performance, however, suffers from the intrinsically small change in surface stress induced by analytes, especially for molecular recognition such as antigen–antibody binding. Through the contact angle change on a tailored solid surface, it is possible to convert a tiny surface stress into a capillary force—a much larger physical quantity needed for a practical sensor application. In this work, a micro-cantilever sensor based on contact angle analysis (CAMCS) was proposed to effectively enhance the sensitivity of a sensor in proportion to the square of the length to thickness ratio of the cantilever structure. CAMCS chips were fabricated using a standard complementary-metal-oxide-semiconductor (CMOS) process to demonstrate a 1250-fold enhancement in the sensitivity of surface stress to bioanalyte adsorption using a piezoresistive sensing method. A real-time and label-free troponin I (cTnI) immunoassay, which is now widely used in clinics and considered a gold standard for the early diagnosis and prognosis of cardiovascular disease, was performed to demonstrate cTnI detection levels as low as 1 pg mL−1. The short detection time of this assay was within several minutes, which matches the detection time of commercially available instruments that are based on fluorescence-labeling techniques.Keywords
This publication has 36 references indexed in Scilit:
- High-resolution cantilever biosensor resonating at air–liquid in a microchannelLab on a Chip, 2011
- Nanomechanical Membrane-type Surface Stress SensorNano Letters, 2011
- Approaches to Increasing Surface Stress for Improving Signal-to-Noise Ratio of Microcantilever SensorsAnalytical Chemistry, 2010
- Label-free technologies for quantitative multiparameter biological analysisAnalytical and Bioanalytical Chemistry, 2009
- Normal capillary forcesAdvances in Colloid and Interface Science, 2009
- Transition in the Evaporation Kinetics of Water Microdrops on Hydrophilic SurfacesLangmuir, 2008
- Cantilever biosensorsThe Analyst, 2008
- Appropriate calibration curve fitting in ligand binding assaysThe AAPS Journal, 2007
- Biochemical Factors Influencing Measurement of Cardiac Troponin I in SerumClinical Chemistry and Laboratory Medicine (CCLM), 1999
- Piezoresistance in polysilicon and its applications to strain gaugesSolid-State Electronics, 1989