Active Iron-Rich Belite Sulfoaluminate Cements: Clinkering and Hydration
- 11 August 2010
- journal article
- research article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 44 (17) , 6855-6862
Abstract
Ordinary Portland cement (OPC) is an environmentally contentious material, as for every ton of OPC produced, on average, 0.97 tons of CO2 are released. Conversely, belite sulfoaluminate (BSA) cements are promising eco-friendly building materials, as their production may deplete CO2 emissions up to 35% (compared to OPC). However, the hydration rate of belite is slow. Here, we report the clinkering of iron-rich BSA materials, their activation with B2O3, and establishing a methodology to measure their improved reactivities. Nonactivated BSA clinker contained only β belite phase, 52 wt %. Meanwhile, BSA clinkers activated with 1 and 2 wt % of B2O3 contained 28 wt % of β and 25 wt % of α′H; and 54 wt % of α′H phase, respectively. Therefore, activation of BSA has been proved as α′H-belite is stabilized. The hydration of the cements has been studied by laboratory and synchrotron X-ray powder diffraction (using Rietveld method and chemical constraints), calorimetry, and environmental scanning electron microscopy. Cement pastes have different hydration rates. For nonactivated BSA cement, 20 and 48% of the belite reacted after one and three months, respectively. Conversely, 37−49% after one month and 52−62% after three months of overall belite reactivities have been measured for BSA cements activated with B2O3.Keywords
This publication has 24 references indexed in Scilit:
- Quantitative Phase Analysis of Laboratory‐Active Belite Clinkers by Synchrotron Powder DiffractionJournal of the American Ceramic Society, 2007
- Hydraulic properties of sulphoaluminate belite cement based on steelmaking slagsAdvances in Cement Research, 2007
- The Crystal Structure of Tobermorite 14 Å (Plombierite), a C–S–H PhaseJournal of the American Ceramic Society, 2005
- Industrially interesting approaches to “low-CO2” cementsCement and Concrete Research, 2004
- The paste hydration of brownmillerite with and without gypsum: a time resolved synchrotron diffraction study at 30, 70, 100 and 150 °CJournal of Materials Chemistry, 2004
- Performance of belite–sulfoaluminate cementsCement and Concrete Research, 2001
- Full Phase Analysis of Portland Clinker by Penetrating Synchrotron Powder DiffractionAnalytical Chemistry, 2000
- A correction for powder diffraction peak asymmetry due to axial divergenceJournal of Applied Crystallography, 1994
- Rietveld refinement of Debye–Scherrer synchrotron X-ray data from Al2O3Journal of Applied Crystallography, 1987
- A profile refinement method for nuclear and magnetic structuresJournal of Applied Crystallography, 1969