Growth and Repair of Rare Earth Oxide Films for Corrosion Protection on the Surface of Stone Cutting Tools
Open Access
Abstract
This paper focuses on analyzing the corrosion mechanism of stone cutting tool surfaces. Rare earth oxide films were prepared on the tool surface using the electrophoretic deposition–sintering method, and their corrosion resistance was investigated. Microstructural and compositional analyses of the surface layer of shot-peened tools and rare earth oxide films were conducted using characterization techniques such as SEM, EBSD, and XRD. The corrosion resistance of the rare earth oxide films was evaluated via an electrochemical workstation. The results indicate that the corrosion morphology on the stone cutting tool surface is pitting corrosion, which is significantly influenced by the friction of the tool coolant. Shot-peening treatment refines the grains in the tool surface layer, promoting the growth of rare earth oxide films. The rare earth oxide film is mainly composed of cerium oxide (CeO2), presenting a continuous and dense structure with slight peeling after sintering. The Group 3 (0.1 mol/L, 3000 V/m, 5 min) rare earth oxide film exhibits the optimal electrochemical behavior and excellent corrosion resistance, with a corrosion potential (Ecorr) of −0.49 V and a corrosion current density (icorr) of 1.445 × 10−7 A/cm2.Keywords
This publication has 29 references indexed in Scilit:
- Electrophoretic deposition of high adhesion energetic coatings (e.g., NiO-Al/Fe2O3)Chemical Engineering Journal, 2025
- Rare earth addition powered corrosion resistance of the surface oxide film on GCr15 bearing steel substrateCorrosion Science, 2024
- Cerium-based oxide coatingsCurrent Opinion in Solid State and Materials Science, 2015
- Influences of the main anodic electroplating parameters on cerium oxide filmsApplied Surface Science, 2014
- Chemical composition and corrosion protection of silane films modified with CeO2 nanoparticlesElectrochimica Acta, 2009
- Composite cerium oxide/titanium oxide thin films for corrosion protection of AZ91D magnesium alloy via sol–gel processMaterials and Corrosion, 2009
- Rare Earth Oxide Thin Films2007
- Characteristics of diamond sawblade wear in sawingInternational Journal of Machine Tools and Manufacture, 1996
- Growth of cerium(IV) oxide films by the electrochemical generation of base methodJournal of Alloys and Compounds, 1996
- Structure, composition and thermal properties of cerium oxide films on platinum {111}Surface Science, 1995