Investigation on tribological and corrosion characteristics of oxide-coated steel and mild steel fiber-based brake friction composites
- 8 April 2019
- journal article
- research article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 71 (3) , 341-347
Abstract
Purpose: The purpose of this work is to investigate the effect of oxide-coated steel in comparison with mild steel fibers on the tribological and corrosion performances of friction composites.Design/methodology/approach: In this study, the friction composites were developed in the form of standard brake pads by using oxide-coated steel and compared with mild steel fibers-based one without varying the other ingredients. The brake pads were developed as per the industrial procedure. The physical, mechanical, thermal properties of the developed brake pads were analyzed as per the industrial standards. The tribological properties were analyzed using the Chase test. The worn surface analysis was done using scanning electron microscope. Corrosion behavior was also analyzed in both salt and normal water conditions.Findings: The experimental results indicate that the oxide-coated steel-based friction composites brake pads possess good physical, chemical, thermal, corrosion resistance and mechanical properties with stable fade and recovery characteristics because of its oxide coating and flake morphology.Originality/value: This paper explains the influence of oxide-coated steel in friction composites for enhancing the tribological performance and corrosion resistance by its oxide coating and flake morphology which could potentially replace mild steel fibers-based problems in friction composites.Keywords
This publication has 11 references indexed in Scilit:
- Effect of different reinforcement materials on the formation of secondary plateaus and friction properties in friction materials for automobilesTribology International, 2018
- Tribological characterization on friction brake in continuous brakingIndustrial Lubrication and Tribology, 2018
- 3. Development and characterization of novel fiber reinforced hybrid friction composites2017
- Synthesis and characterization of zeolite NaA and NaY coating on mild steelJournal of Sol-Gel Science and Technology, 2016
- Influence of thermal conductivity and thermal stability on the fade and recovery characteristics of non-asbestos semi-metallic disc brake padJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2015
- Zeolite-coated steel fibers for friction materials applicationsProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2014
- Study of the interaction between microstructure, mechanical and tribo-performance of a commercial brake lining materialMaterials & Design (1980-2015), 2014
- Wear performance and its online monitoring of the semimetal brake lining for automobilesIndustrial Lubrication and Tribology, 2014
- Effects of Different Kinds of Fibers on Mechanical and Tribological Properties of Brake Friction MaterialsTribology Transactions, 2013
- Review of automotive brake friction materialsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2004