Relation between Mechanical Hardening and Nitrogen Profile of PBII Nitrided Titanium Alloy
Open Access
- 17 December 2022
- Vol. 15 (24) , 9028
Abstract
Surface treatments of Ti-6Al-4V alloys are of utmost importance for biomedical applications since they allow for tribological gain. Here, Ti-6Al-4V disks have been PBII nitrided at either 500, 600, 700 and 800 °C. A set of techniques (XRD, SEM-EDS, EBSD and GDOES) was used to characterize the surface microstructural and chemical changes. Nanoindentation was used to assess the induced changes in terms of mechanical properties. Two types of nitrided domains are revealed. Starting from the surface, a nitride bilayer composed of δ-TiN/ϵ-Ti2N with enhanced surface resistance is supported by an α-Ti(N) solid solution formed at depth. Hardness values peak at 12–14 GPa at the surface, which is almost twice as large as the bulk value (about 7 GPa). For the moderate temperatures used here, a deep (10–15 µm) and strong hardness (14 GPa) enhancement together with a smooth gradient can be achieved.Keywords
This publication has 38 references indexed in Scilit:
- Hardness and elastic modulus gradients in plasma-nitrided 316L polycrystalline stainless steel investigated by nanoindentation tomographyActa Materialia, 2012
- Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methodsSurface and Coatings Technology, 2005
- Mesenchymal stem cell adhesion and spreading on microwave plasma‐nitrided titanium alloyJournal of Biomedical Materials Research Part A, 2005
- Elastic–plastic resistance profile of PBII nitrided titaniumScripta Materialia, 2004
- Improved nitridation efficiency and mechanical property of stainless steel surface after N2–H2 plasma nitridation at low temperatureMaterials Letters, 2002
- High temperature plasma based ionic implantation of titanium alloys and siliconSurface and Coatings Technology, 2002
- Nitrogen profiles in materials implanted via plasma-based ion implantationSurface and Coatings Technology, 2002
- A comparative study of the influence of plasma treatments, PVD coatings and ion implantation on the tribological performance of Ti–6Al–4VSurface and Coatings Technology, 1999
- Wear resistance of plasma immersion ion implanted Ti6Al4VSurface and Coatings Technology, 1996
- Étude cinétique, diffusionnelle et morphologique de la nitruration du titane par l'azote à haute température: Propriétés mécaniques et structurales des solutions solides Tiα-azoteJournal of the Less Common Metals, 1977