Prediction of ductile fracture initiation for Ti–10V–2Fe–3Al alloy by compressions at different temperatures and strain rates
Authors:
- G.-Z. QuanG.-Z. Quan
- Z.-Y. ZouZZZ.-Y. Zou
- D.-S. WuDWD.-S. Wu
- J.-T. LiangJLJ.-T. Liang
- 2 January 2016
- journal article
- research article
- Published by Taylor & Francis in Materials at High Temperatures
- Vol. 33 (1)
Abstract
Under the guidance of the Cockcroft–Latham damage theory, an integrated approach involving hot compression tests, numerical simulations and mathematic computations provides support to construct ductile fracture criteria diagram along with deformation conditions for Ti–10V–2Fe–3Al alloy. A series of compressions with a fixed height reduction of 60% were performed in a temperature range of 675–850°C and a strain rate range of 0.01–10 s− 1 on a Gleeble3500 thermo-mechanical simulator. According to the strain–stress data collected from compressions, the ductile damage accumulation processes along with strain under different temperatures and strain rates were solved by finite element method, and then each accumulation process was clarified as uncracked and cracked stages by an indicator, sensitive rate of Cockcroft–Latham damage in plastic deformation. The results show that the maximum damage value appears in the region of upsetting drum, while the minimal value appears in the middle region. A varying ductile fracture criteria (VDFC) is described as a function of temperature and strain rate, and its value changes from 0.1096 to 0.2033 at temperature 675–850°C and strain rate 0.01–10 s− 1. In bulk forming operations of Ti–10V–2Fe–3Al alloy, the VDFC can help technicians to choose suitable process parameters and avoid the occurrence of fracture. It is very significant to guide the practical production.Keywords
This publication has 32 references indexed in Scilit:
- Dynamic recrystallization kinetics in α phase of as-cast Ti–6Al–2Zr–1Mo–1V alloy during compression at different temperatures and strain ratesMaterials Science and Engineering: A, 2014
- Micromechanics of Ti–10V–2Fe–3Al: In situ synchrotron characterisation and modellingActa Materialia, 2007
- Improved ductile fracture criterion for cold forming of spheroidised steelJournal of Materials Processing Technology, 2004
- Numerical modelling of ductile plastic damage in bulk metal formingInternational Journal of Mechanical Sciences, 2003
- Hot deformation mechanisms in metastable beta titanium alloy Ti–10V–2Fe–3AlMaterials Science and Technology, 2001
- The prediction of central burst defects in extrusion and wire drawingJournal of Materials Processing Technology, 2000
- Plastic deformation and fracture behavior of a Fe-modified Al3Ti-base L12 intermetallic alloyJournal of Materials Research, 1991
- How to use damage mechanicsNuclear Engineering and Design, 1984
- Microstructure, tensile deformation, and fracture in aged ti 10V-2Fe-3AlMetallurgical Transactions A, 1983
- Formation and reversion of stress induced martensite in Ti-10V-2Fe-3AlActa Metallurgica, 1982