Abstract
This study utilized laser processing to prepare a wood-based microfluidic chip incorporating two detection methods (microwave detection and colorimetric spectroscopy detection) for detecting lead ions in solutions. By optimizing CO2 and femtosecond laser processing parameters and ultraviolet bonding processes, preparation of the chip was achieved. Femtosecond laser processing created 5.285 µm capacitive gaps in resistor-inductor-capacitor (RLC) resonant circuits. RLC circuits and a sodium rhodizonate colorimetric method were used to detect lead ions in solutions. Experimental results showed that the dual-mode system exhibited detection limits of 1 µg/L (colorimetry, linear response at 620 nm, ) and 10 µg/L (microwave sensing via the peak frequency changes between 2.5 and 3.2 GHz, with a sensitivity of 0.36 dB/10 µg/L). This study accomplished the precision manufacturing of a wood-based microfluidic chip through laser processing and realized the integration of microwave and spectroscopic detection technologies.
Funding Information
  • National Natural Science Foundation of China (52175540, 61705124)
  • Key Scientific Research Project of the Education Department of Shaanxi Province (24JR042)
  • China Postdoctoral Science Foundation (2020M673382)
  • Science and Technology Plan of Weiyang District, Xi’an City, Shaanxi Province (202116)
  • Doctoral Research Fund of Shaanxi University of Science and Technology (2016BJ-78)
  • Science and Technology Innovation Team of Shaanxi Province, China (2023-CX-TD-16)

This publication has 23 references indexed in Scilit: