Local seismic network for monitoring of a potential nuclear power plant area
Open Access
- 5 November 2015
- journal article
- research article
- Published by Springer Nature in Journal of Seismology
- Vol. 20 (2) , 397-417
Abstract
This study presents a plan for seismic monitoring of a region around a potential nuclear power plant. Seismic monitoring is needed to evaluate seismic risk. The International Atomic Energy Agency has set guidelines on seismic hazard evaluation and monitoring of such areas. According to these guidelines, we have made a plan for a local network of seismic stations to collect data for seismic source characterization and seismotectonic interpretations, as well as to monitor seismic activity and natural hazards. The detection and location capability of the network were simulated using different station configurations by computing spatial azimuthal coverages and detection threshold magnitudes. Background noise conditions around Pyhäjoki were analyzed by comparing data from different stations. The annual number of microearthquakes that should be detected with a dense local network centered around Pyhäjoki was estimated. The network should be dense enough to fulfill the requirements of azimuthal coverage better than 180° and automatic event location capability down to ML ∼ 0 within a distance of 25 km from the site. A network of 10 stations should be enough to reach these goals. With this setup, the detection threshold magnitudes are estimated to be ML = −0.1 and ML = 0.1 within a radius of 25 and 50 km from Pyhäjoki, respectively. The annual number of earthquakes detected by the network is estimated to be 2 (ML ≥ ∼ −0.1) within 25 km radius and 5 (ML ≥ ∼−0.1 to ∼0.1) within 50 km radius. The location accuracy within 25 km radius is estimated to be 1–2 and 4 km for horizontal coordinates and depth, respectively. Thus, the network is dense enough to map out capable faults with horizontal accuracy of 1–2 km within 25 km radius of the site. The estimation is based on the location accuracies of five existing networks in northern Europe. Local factors, such as seismic noise sources, geology and infrastructure might limit the station configuration and detection and location capability of the network.Keywords
This publication has 30 references indexed in Scilit:
- Seismic Network Evaluation through Simulation: An Application to the Italian National Seismic NetworkBulletin of the Seismological Society of America, 2011
- Annual Report 2009EPPO Bulletin, 2010
- Semiempirical Statistics of Correlation-Detector PerformanceBulletin of the Seismological Society of America, 2008
- The detection and location of low magnitude earthquakes in northern Norway using multi-channel waveform correlation at regional distancesPhysics of the Earth and Planetary Interiors, 2007
- Attenuation Relationships of Peak Ground Acceleration and Velocity for Crustal Earthquakes in TaiwanBulletin of the Seismological Society of America, 2005
- Assessing the Quality of Earthquake Catalogues: Estimating the Magnitude of Completeness and Its UncertaintyBulletin of the Seismological Society of America, 2005
- Symptomatic Features of Intraplate EarthquakesSeismological Research Letters, 2003
- A new local magnitude scale for the Finnish seismic networkTectonophysics, 1996
- The magnitude-frequency distribution of earthquakes recorded with deep seismometers at Cajon Pass, southern CaliforniaTectonophysics, 1996
- Earthquakes in northern Europe in 1375–1989Tectonophysics, 1992