Strongly Coupled Fluid–Structure Interaction in a Three-Dimensional Model Combustor During Limit Cycle Oscillations
- 30 January 2018
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 140 (6) , 061505
Abstract
Due to the high temperature of the flue gas flowing at high velocity and pressure, the wall cooling is extremely important for the liner of a gas turbine engine combustor. The liner material is heat-resistant steel with relatively low heat conductivity. To accommodate outside wall forced air cooling, the liner is designed to be thin, which unfortunately facilitates the possibility of high-amplitude wall vibrations (and failure due to fatigue) in case of pressure fluctuations in the combustor. The latter may occur due to a possible occurrence of a feedback loop between the aerodynamics, the combustion, the acoustics, and the structural vibrations. The structural vibrations act as a source of acoustic emitting the acoustic waves to the confined fluid. This leads to amplification in the acoustic filed and hence the magnitude of instability in the system. The aim of this paper is to explore the mechanism of fluid–structure interaction (FSI) on the LIMOUSINE setup which leads to limit cycle of pressure oscillations (LCO). Computational fluid dynamics (CFD) analysis using a RANS approach is performed to obtain the thermal and mechanical loading of the combustor liner, and finite element model (FEM) renders the temperature, stress distribution, and deformation in the liner. Results are compared to other numerical approaches like zero-way interaction and conjugated heat transfer model (CHT). To recognize the advantage/disadvantage of each method, validation is made with the available measured data for the pressure and vibration signals, showing that the thermoacoustic instabilities are well predicted using the CHT and two-way coupled approaches, while the zero-way interaction model prediction gives the largest discrepancy from experimental results.Keywords
This publication has 36 references indexed in Scilit:
- Control of sound and vibration of fluid-filled cylindrical shells via periodic design and active controlJournal of Sound and Vibration, 2013
- Analysis of conjugated heat transfer, stress and failure in a gas turbine blade with circular cooling passagesEngineering Failure Analysis, 2011
- Active control of the acoustic boundary conditions of combustion test rigsJournal of Sound and Vibration, 2008
- Strong coupling strategy for fluid–structure interaction problems in supersonic regime via fixed point iterationJournal of Sound and Vibration, 2008
- Experimental Investigation of the Acoustic Field in a Bluff-Body CombustorInternational Journal of Aeroacoustics, 2008
- Vibration prediction in combustion chambers by coupling finite elements and large eddy simulationsJournal of Sound and Vibration, 2007
- A parametric study on fluid–structure interaction problemsJournal of Sound and Vibration, 2003
- RECONSTRUCTION OF ACOUSTIC TRANSFER MATRICES BY INSTATIONARY COMPUTATIONAL FLUID DYNAMICSJournal of Sound and Vibration, 2001
- A comparison between numerical calculations and experimental measurements of the structure of a counterflow diffusion flame burning diluted methane in diluted airSymposium (International) on Combustion, 1988
- Acoustic scattering by membranes and plates with line constraintsJournal of Sound and Vibration, 1978