Lithiophilic Nanowire Guided Li Deposition in Li Metal Batteries
Authors:
Open Access
Abstract
Lithium (Li) metal batteries (LMBs) provide superior energy densities far beyond current Li‐ion batteries (LIBs) but practical applications are hindered by uncontrolled dendrite formation and the build‐up of dead Li in “hostless” Li metal anodes. To circumvent these issues, we created a 3D framework of a carbon paper (CP) substrate decorated with lithiophilic nanowires (silicon (Si), germanium (Ge), and SiGe alloy NWs) that provides a robust host for efficient stripping/plating of Li metal. The lithiophilic Li22Si5, Li22(Si0.5Ge0.5)5, and Li22Ge5 formed during rapid Li melt infiltration prevented the formation of dead Li and dendrites. Li22Ge5/Li covered CP hosts delivered the best performance, with the lowest overpotentials of 40 mV (three times lower than pristine Li) when cycled at 1 mA cm−2/1 mAh cm−2 for 1000 h and at 3 mA cm−2/3 mAh cm−2 for 500 h. Ex situ analysis confirmed the ability of the lithiophilic Li22Ge5 decorated samples to facilitate uniform Li deposition. When paired with sulfur, LiFePO4, and NMC811 cathodes, the CP‐LiGe/Li anodes delivered 200 cycles with 82%, 93%, and 90% capacity retention, respectively. The discovery of the highly stable, lithiophilic NW decorated CP hosts is a promising route toward stable cycling LMBs and provides a new design motif for hosted Li metal anodes.Keywords
Funding Information
- Science Foundation Ireland (18/SIRG/5484)
- Science Foundation Ireland (12/RC/2275_P2)
This publication has 58 references indexed in Scilit:
- Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodesNature Communications, 2015
- High rate and stable cycling of lithium metal anodeNature Communications, 2015
- On the origin of the significant difference in lithiation behavior between silicon and germaniumJournal of Power Sources, 2014
- Aprotic and Aqueous Li–O2 BatteriesChemical Reviews, 2014
- Lithium metal anodes for rechargeable batteriesEnergy & Environmental Science, 2013
- Nanostructured Si(1-x)Gex for Tunable Thin Film Lithium-Ion Battery AnodesACS Nano, 2013
- Role of LiNO3 in rechargeable lithium/sulfur batteryElectrochimica Acta, 2012
- Li–O2 and Li–S batteries with high energy storageNature Materials, 2011
- Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis setComputational Materials Science, 1996
- Ab initiomolecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germaniumPhysical Review B, 1994