Influence of Treatment Methods of Recycled Concrete Aggregate on Behavior of High Strength Concrete
Open Access
Abstract
Worldwide the concrete industry has started embracing the utilization of recycled concrete aggregates (RCAs) resulting from demolition and construction waste as full or partial substituents in the production of high-strength concrete (HSC) due to their economic and environmental benefits. Several parameters were experimentally investigated in this study. The first parameter analyzed the effect of replacing varying percentages of coarse aggregate with recycled aggregate. The second parameter examined the influence of two aggregate sizes (10 and 20 mm). The third parameter was intended for investigating the influence of three different RCA treatment methods utilizing sodium silicate immersion, cement slurry, and the Los Angeles (LA) abrasion simulation. The test results generally indicated degradation in the engineering properties of concrete produced using untreated RCA compared to the control. The degree of reduction increased as the replacement percentage was increased regardless of the aggregate size. The reduction in compressive strength appeared to have a more pronounced effect in comparison to the splitting tensile strength. The use of treated RCA improved concrete slump by 15–35%. This also caused enhancement in the engineering properties, especially for the LA abrasion mechanical treatment, which was very promising for both aggregate sizes. In comparison with the untreated RCA, the relative enhancement in water absorption was up to 76%, whereas splitting tensile and compressive strengths increased by 3–50% and 5–60%, respectively.Keywords
Funding Information
- Deanship of Scientific Research, King Saud University (Funding through Vice Deanship of Scientific Research Chairs)
This publication has 43 references indexed in Scilit:
- The effect of recycled concrete aggregate properties on the bond strength between RCA concrete and steel reinforcementCement and Concrete Research, 2011
- Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concreteConstruction and Building Materials, 2009
- Influence of recycled concrete aggregates on strength properties of concreteConstruction and Building Materials, 2009
- Study on the influence of attached mortar content on the properties of recycled concrete aggregateConstruction and Building Materials, 2009
- Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAscConstruction and Building Materials, 2008
- Removal of cement mortar remains from recycled aggregate using pre-soaking approachesResources, Conservation and Recycling, 2007
- Assessment of recycling process induced damage sensitivity of recycled concrete aggregatesCement and Concrete Research, 2004
- Influence of the roughness of aggregate surface on the interface bond strengthCement and Concrete Research, 2002
- Use of recycled concrete aggregate in high-strength concreteMaterials and Structures, 2000
- Interfacial transition zone in cementitious materialsCement and Concrete Research, 2000