Mechanical Properties and Morphologies of Carboxyl-Terminated Butadiene Acrylonitrile Liquid Rubber/Epoxy Blends Compatibilized by Pre-Crosslinking
Open Access
Abstract
In order to enhance the compatibilization and interfacial adhesion between epoxy and liquid carboxyl-terminated butadiene acrylonitrile (CTBN) rubber, an initiator was introduced into the mixture and heated to initiate the cross-linking reaction of CTBN. After the addition of curing agents, the CTBN/epoxy blends with a localized interpenetrating network structure were prepared. The mechanical properties and morphologies of pre-crosslinked and non-crosslinked CTBN/epoxy blends were investigated. The results show that the tensile strength, elongation at break and impact strength of pre-crosslinked CTBN/epoxy blends are significantly higher than those of non-crosslinked CTBN/epoxy blends, which is primarily due to the enhanced interfacial strength caused by the chemical bond between the two phases and the localized interpenetrating network structure. Both pre-crosslinked and non-crosslinked CTBN/epoxy blends show a bimodal distribution of micron- and nano-sized rubber particles. However, pre-crosslinked CTBN/epoxy blends have smaller micron-sized rubber particles and larger nano-sized rubber particles than non-crosslinked CTBN/epoxy blends. The dynamic mechanical analysis shows that the storage modulus of pre-crosslinked CTBN/epoxy blends is higher than that of non-crosslinked CTBN/epoxy blends. The glass transition temperature of the CTBN phase in pre-crosslinked CTBN/epoxy blends increases slightly compared with the CTBN/epoxy system. The pre-crosslinking of rubber is a promising method for compatibilization and controlling the morphology of rubber-modified epoxy materials.Keywords
Funding Information
- National Natural Science Foundation of China (51463020)
This publication has 45 references indexed in Scilit:
- Morphology and properties of nanostructured epoxy blends toughened with epoxidized carboxyl-terminated liquid rubberIranian Polymer Journal, 2015
- Epoxy Toughening with Low Graphene LoadingAdvanced Functional Materials, 2014
- Toughening of dicyandiamide-cured DGEBA-based epoxy resins by CTBN liquid rubberIranian Polymer Journal, 2013
- Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB)Journal of Applied Polymer Science, 2011
- Synthesis, characterization and properties of organoclay‐modified polyurethane/epoxy interpenetrating polymer network nanocompositesPolymer International, 2005
- Influence of carboxyl‐terminated (butadiene‐co‐acrylonitrile) loading on the mechanical and thermal properties of cured epoxy blendsJournal of Polymer Science Part B: Polymer Physics, 2004
- Rubber toughened epoxyMacromolecular Research, 2004
- Modification of epoxy resin using reactive liquid (ATBN) rubberEuropean Polymer Journal, 2002
- Toughening of epoxy resins with thermoplastics. Ii. Tetrafunctional epoxy resin‐polyetherimide blendsPolymer International, 1991
- Rubber‐modified epoxies. I. Influence of carboxyl‐terminated butadiene‐acrylonitrile random copolymers (CTBN) on the polymerization and phase separation processesJournal of Applied Polymer Science, 1990