Seismic response comparison of an RC frame structure with fixed base and lead rubber bearing isolation
Open Access
- 20 November 2025
- journal article
- Published by Luminescience Press Limited in Civil and Energy Research
- p. 30-39
Abstract
In earthquake-prone regions, ensuring structural resilience is crucial, particularly for essential buildings such as hospitals, schools, and commercial complexes. This study investigates the seismic performance of a G+12 story reinforced concrete (RC) building using ETABS 2022 and evaluates the effects of base isolation with Lead Rubber Bearings (LRBs). The model was analysed in both fixed-base and base-isolated configurations under seismic loading, to assess key parameters, including inter-story drift, story displacement, shear, stiffness, and natural periods. The results indicated significant improvements in the base-isolated model, with inter-story drifts reduced by up to 68% in the X direction and 69% in the Y direction, demonstrating a marked reduction in lateral deformations. Although absolute story displacements increased, this was due to the flexibility incorporated into the isolation system, which enabled the isolators to absorb and dissipate seismic energy, thereby reducing forces on the superstructure. Furthermore, story shear was reduced by 29–31% across all stories, and story stiffness was enhanced by up to 318% at lower stories, contributing to improved structural stability. The natural periods of the building’s vibration modes increased, with the fundamental period lengthening by 45.5%. This shifted the building’s response away from the predominant seismic frequencies and reduced seismic acceleration demands. However, the study assumes ideal behavior of the LRBs without accounting for potential long-term degradation. Despite increased displacements, the reduction in base shear and drift indicates significant cost savings in repairs and maintenance, providing insights into the cost-effectiveness and benefits of base isolation in earthquake-prone areas.Keywords
This publication has 14 references indexed in Scilit:
- Lead-rubber-bearing with negative stiffness springs (LRB-NS) for base-isolation seismic design of resilient bridges: A theoretical feasibility studyEngineering Structures, 2022
- Towards standardized nuclear reactors: Seismic isolation and the cost impact of the earthquake load caseNuclear Engineering and Design, 2022
- Effect of Using High Damping Rubber Bearings for Seismic Isolation of the BuildingsInternational Journal of Steel Structures, 2021
- Earthquake early warning-enabled smart base isolation systemAutomation in Construction, 2020
- Influence of Clay Anisotropy on Model Simulations of Wetting CollapseJournal of Engineering Mechanics, 2020
- Effects of subfreezing temperature on the seismic response of lead rubber bearing isolated bridgeSoil Dynamics and Earthquake Engineering, 2019
- A smart mechatronic base isolation system using earthquake early warningSoil Dynamics and Earthquake Engineering, 2019
- Modeling of high damping rubber bearings under bidirectional shear loadingSoil Dynamics and Earthquake Engineering, 2019
- Frequency control of smart base isolation system employing a novel adaptive magneto-rheological elastomer base isolatorJournal of Intelligent Material Systems and Structures, 2015
- Seismic analysis of base isolated buildingsArchives of Computational Methods in Engineering, 1997