Analysis of vibration induced by cogging torque in permanent-magnet synchronous motors
- 1 May 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
Noise and vibration of electrical machines are a major concern for applications where comfort is a significant aspect. There are several faults that may arise in machines increasing noise and vibration. Cogging is one of the main faults in Permanent Magnet Synchronous Machines (PMSMs). Tools for the diagnosis of cogging are needed to detect the machines that do not fulfil the quality requirements. The usual methods found in bibliography to assess cogging are Motor Current Signature Analysis (MCSA) or directly measuring it by means of a torque sensor. This paper studies the feasibility of the alternative and unpublished method of vibration signals measured with accelerometers to evaluate cogging. In this paper a machine is designed and manufactured, in order to measure the effect of cogging in the vibration of the machine. The tested machine allows to apply several cogging levels, and the vibrations and the torque are measured with the machine running at several rotational speeds. Especially at lower rotational speeds, the effect of the cogging is clearly observed in the spectra of the torque. However, the spectra of the vibration signals do not show the effect of cogging torque, since at the cogging frequency the amplitudes do not correspond to the cogging levels.Keywords
This publication has 17 references indexed in Scilit:
- Cogging Torque Reduction in Line Start Permanent Magnet Synchronous MotorJournal of Electrical Engineering & Technology, 2016
- Design and construction of a laboratory bench system for the teaching and training of engineers on diagnostics of permanent magnet motors2015
- The modelling, simulation and experimental testing $60#?tjl$62#?>of the dynamic responses of an elevator systemMechanical Systems and Signal Processing, 2014
- Accurate Torque Ripple Measurement for PMSMIEEE Transactions on Instrumentation and Measurement, 2011
- A New Technique of Cogging Torque Suppression in Direct-Drive Permanent-Magnet Brushless MachinesIEEE Transactions on Industry Applications, 2010
- A simple method for measuring cogging torque in permanent magnet machines2009
- Measurement and Control of Torque Ripple-Induced Frame Torsional Vibration in a Surface Mount Permanent Magnet MachineIEEE Transactions on Power Electronics, 2005
- Suppression control method for torque vibration of AC motor utilizing repetitive controller with Fourier transformIEEE Transactions on Industry Applications, 2002
- Influence of design parameters on cogging torque in permanent magnet machinesIEEE Transactions on Energy Conversion, 2000
- Pulsating torque minimization techniques for permanent magnet AC motor drives-a reviewIEEE Transactions on Industrial Electronics, 1996