RSM-Based Model to Estimate the V-Cut Drill and Blast Pattern Specific Charge in Rock Tunneling
Authors:
- 1 November 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 21 (11) , 06021030
Abstract
Drilling and blasting (D&B) technology is an appropriate method for rock excavation in underground mining and civil engineering projects. Specific charge as the amount of explosives used per cubic meters of extracted rock is the most important role in D&B operations. Therefore, different models have been proposed for the estimation of specific charge. The aim of this research is to develop a second-order quadratic model using response surface methodology (RSM) to estimate the specific charge in rock tunneling (V-cut D&B pattern). For this purpose, 31 data series related to geomechanic and D&B are used for modeling. In the suggested model, rock quality designation (RQD), P-wave velocity (Km/s), tunnel cross section area (m2), blast hole coupling ratio, and D&B pattern spacing/burden ratio are used as effective factors on specific charge as model response. The proposed RSM-based quadratic model consists of one quadratic, five linear, and five interaction terms. The statistical details of this model, conventional related graphs, and RSM specific analysis have satisfied the recommended model. For the specific charge, the spacing/burden ratio is more effective than the other factors and interactions.Keywords
This publication has 18 references indexed in Scilit:
- Artificial Neural Network or Empirical Criteria? A Comparative Approach in Evaluating Maximum Charge per Delay in Surface Mining - Sungun Copper MineJournal of the Geological Society of India, 2012
- Continuous production of biodiesel from waste cooking oil in a reactive distillation column catalyzed by solid heteropolyacid: Optimization using response surface methodology (RSM)Fuel, 2012
- Application of ANNs and MVLRA for Estimation of Specific Charge in Small TunnelInternational Journal of Geomechanics, 2012
- Comparison of tunnel blast design modelsTunnelling and Underground Space Technology, 2006
- Suggestions of rock classification methods for blast design and application to tunnel blastingTunnelling and Underground Space Technology, 2006
- Development of rational models for tunnel blast prediction based on a parametric studyGeotechnical and Geological Engineering, 2004
- Critical Comparison of Julius Kruttschnitt Mineral Research Centre (JKMRC) Blast Fragmentation ModelsFragblast, 2002
- Estimation of the powder factor in bench blasting from the Bond work indexMining Technology: Transactions of the Institutions of Mining and Metallurgy, 2001
- Blast performance in small tunnels - a critical evaluation in underground metal minesTunnelling and Underground Space Technology, 1998
- Predicting powder factor in mixed-face condition: development of a correlation based on investigations in a tunnel through basaltic flowsEngineering Geology, 1997