Evaluation of the bio-drying process of municipal solid waste using rotating drums Bio-drying rotary drum
Open Access
- 1 January 2021
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Anais da Academia Brasileira de Ciências
- Vol. 93 (4) , e20200085
Abstract
Most of the municipal solid waste collected is disposed of in landfills and controlled landfills. However, efficient ways of recovering these wastes have emerged, such as bio-drying. This technique uses the exothermic degradation reaction of organic matter carried out by microorganisms along with aeration to reduce the moisture of the waste. The objective of the research was to test the bio-drying technique in a rotary drum. For this purpose, three rotary drums were built, and the tested residue was synthetically produced. The aeration rate tested was 1 liter per kilogram per minute, and rotation was performed for one minute every three hours. The analyses performed on the residues were moisture content, volatile solids, calorific value, particle size, and temperature profile. The residues entered the bio-drying process with a moisture content of 52%, 49%, and 54% and went out with 15%, 13%, and 10% for drum 1, 2, and 3, respectively, a reduction of more than 70%. The calorific value increased by 95%, 88%, and 122% for drum 1, 2, and 3, respectively. During the process, no leachate generation was observed.Keywords
This publication has 22 references indexed in Scilit:
- Biodrying as a biological process to diminish moisture in gardening and harvest wastesEnvironment, Development and Sustainability, 2012
- Material and energy recovery in integrated waste management systems: An innovative approach for the characterization of the gaseous emissions from residual MSW bio-dryingWaste Management, 2011
- Evolution of heavy metals in municipal solid waste during bio-drying and implications of their subsequent transfer during combustionWaste Management, 2011
- Effects of biodrying process on municipal solid waste propertiesBioresource Technology, 2011
- Effect of air-flow rate and turning frequency on bio-drying of dewatered sludgeWater Research, 2010
- Bio-drying and size sorting of municipal solid waste with high water content for improving energy recoveryWaste Management, 2010
- Key variables analysis of a novel continuous biodrying process for drying mixed sludgeBioresource Technology, 2010
- Potential gases emissions from the combustion of municipal solid waste by bio-dryingJournal of Hazardous Materials, 2009
- Effect of inoculation time on the bio-drying performance of combined hydrolytic–aerobic processBioresource Technology, 2009
- The use of respiration indices in the composting process: a reviewWaste Management & Research: The Journal for a Sustainable Circular Economy, 2006