Experimental and Numerical Studies on the Influence of Blade Number in a Small Water Turbine
Open Access
Abstract
This paper demonstrates the procedure of blade adjustment in a Kaplan-type water turbine, based on calculations of the flow system. The geometrical adjustment of a twisted blade with varying chord length is described in the study. Computational fluid dynamics (CFD) analysis was used to characterise aerofoil and turbine performance. Furthermore, two turbines, with a different number of blades, were designed, manufactured, and tested experimentally. The numerical model results were then compared with the experimental data. The studies were carried out with different rotational velocities and different stator blade incidence angles. The paper shows a comparison of the turbine efficiencies that were assessed, using numerical and experimental methods, of a flow system with four- and five-bladed rotors. The numerical model results matched up well with those of the experimental study. The efficiency of the proposed turbines reached up to 72% and 84% for four-bladed and five-bladed designs, respectively. These efficiencies, when considered with the turbine’s simplicity, low production and maintenance costs, as well as their potential for harvesting energy from low energy flows, mean that Kaplan turbines provide a promising technology for processing renewable energy.Keywords
This publication has 18 references indexed in Scilit:
- Analysis of the degradation in the Wells turbine blades of the Pico oscillating-water-column wave energy plantRenewable and Sustainable Energy Reviews, 2019
- Load Rejection Transient Process Simulation of a Kaplan Turbine Model by Co-Adjusting Guide Vanes and Runner BladesEnergies, 2018
- Overview of SPH-ALE applications for hydraulic turbines in ANDRITZ HydroJournal of Hydrodynamics, 2018
- Micro hydro power generation from water supply system in high rise buildings using pump as turbinesEnergy, 2017
- Comparative Study of Small Hydropower Turbine Efficiency at Low Head WaterEnergy Procedia, 2017
- Selection of axial hydraulic turbines for low-head microhydropower plantsThermal Engineering, 2015
- Dynamic Model of Kaplan Turbine Regulating System Suitable for Power System AnalysisMathematical Problems in Engineering, 2015
- Cross-flow Turbine Design for Variable Operating ConditionsProcedia Engineering, 2014
- Performance of a low-head pico-hydro Turgo turbineApplied Energy, 2013
- Research and development aspects of pico-hydro powerRenewable and Sustainable Energy Reviews, 2012