First-principles study of the matrix alloying effect of X (X = Cr, Mo, W, V, Ti, Si) on the bonding characteristics and mechanical properties of the NbC/Fe interface
Open Access
- 23 January 2025
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science: Materials in Engineering
- Vol. 20 (1) , 1-11
Abstract
Matrix alloying is currently the most commonly used means to improve the interfacial bonding strength. To explore the influence of different alloying elements on the interfacial bonding characteristics and mechanical properties of NbC/Fe, this study investigates the influence of the alloying element X (X = Cr, Mo, W, V, Ti, Si) on the properties of the NbC/Fe surface by using first principles and analyzes the segregation behavior, work of adhesion, electronic structure, and tensile strength of the interface before and after doping with the aforementioned alloying elements. The results demonstrate that the segregation energies of Cr, V, and Ti are less than 0, indicating that these alloy elements tend to segregate at the interface. Other alloying elements have positive segregation energies and are solids dissolved in the Fe matrix. When Si is doped at the interface, the adhesion work of the interface is reduced, and the binding property of the interface is destroyed. The charge density difference and population analyses demonstrated that the charge transfer between Cr, V, Ti, Mo, and W was localized, and there was a charge depletion region, presenting covalent characteristics. After doping, the Si atom demonstrated a charge state of loss, and the charge transfer had no clear direction, indicating the characteristics of an ionic bond. According to the theoretical tensile strength analysis, the addition of Mo, W, Si, and Cu will destroy the critical tensile strain at the interface. The tensile strength and strain of the interface significantly improved after the matrix alloying of Fe by Cr, V and Ti, the microstructure evolved during the tensile deformation, and a new phase was formed. A correlation between the atomic calculations and mechanical properties can be determined using first principles, as well as a reference for practical engineering applications.Keywords
This publication has 43 references indexed in Scilit:
- A powder metallurgy approach to liquid metal dealloying with applications in additive manufacturingActa Materialia, 2022
- Origin of coercivity in an anisotropic Sm(Fe,Ti,V)12-based sintered magnetActa Materialia, 2021
- Precipitation and micromechanical behavior of the coherent ordered nanoprecipitation strengthened Al-Cr-Fe-Ni-V high entropy alloyActa Materialia, 2021
- Effects of alloying elements X (Cr, Mn, Mo, Ni, Si) on the interface stability of TiC (001)/γ-Fe (001) in TiC/316L stainless steel composite formed by selective laser melting: first principles and experimentsAdvanced Composites and Hybrid Materials, 2021
- Understanding the influence of Lu, La and Ga active elements on the bonding properties of Sn/SiO2 interfaces from first principle calculationsCeramics International, 2020
- Fabrication of (Ta,W)C surface gradient layer on Ta-10W alloy by in situ solid-phase diffusionApplied Surface Science, 2019
- Revealing the novel fracture mechanism of the interfaces of TiB2/Fe composite from a first principles investigationActa Materialia, 2018
- Effects of different alloying additives X (X=Si, Al, V, Ti, Mo, W, Nb, Y) on the adhesive behavior of Fe/Cr2O3 interfaces: A first-principles studyComputational Materials Science, 2015
- Authors’ replyMetallurgical and Materials Transactions A, 1999
- Effect of stress during aging on the precipitation of θ′ in Al-4 Wt pct CuMetallurgical Transactions A, 1975