Optimization of Alumina Ceramics Corrosion Resistance in Nitric Acid
Open Access
Abstract
The development of ceramic materials resistance in various aggressive media combined with required mechanical properties is of considerable importance for enabling the wider application of ceramics. The corrosion resistance of ceramic materials depends on their purity and microstructure, the kind of aggressive media used and the ambient temperature. Therefore, the corrosion resistance of alumina ceramics in aqueous HNO3 solutions of concentrations of 0.50 mol dm−3, 1.25 mol dm−3 and 2.00 mol dm−3 and different exposure times—up to 10 days—have been studied. The influence of temperature (25, 40 and 55 °C) was also monitored. The evaluation of Al2O3 ceramics corrosion resistance was based on the concentration measurements of eluted Al3+, Ca2+, Fe3+, Mg2+, Na+ and Si4+ ions obtained by inductively coupled plasma atomic emission spectrometry (ICP-AES), as well as density measurements of the investigated alumina ceramics. The response surface methodology (RSM) was used for the optimization of parameters within the experimental “sample-corrosive media” area. The exposure of alumina ceramics to aqueous HNO3 solutions was conducted according to the Box–Behnken design. After the regression functions were defined, conditions to achieve the maximum corrosion resistance of the sintered ceramics were determined by optimization within the experimental area.Keywords
This publication has 30 references indexed in Scilit:
- Box-Behnken design: An alternative for the optimization of analytical methodsAnalytica Chimica Acta, 2007
- Microstructural Coarsening of Zirconia‐Toughened Alumina CompositesJournal of the American Ceramic Society, 2005
- Mechanical properties of alumina-zirconia composites for ceramic abutmentsMaterials Research, 2004
- Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effectsJournal of Materials Processing Technology, 2003
- Mechanism and Kinetics of the Reactions of NO2 or HNO3 with Alumina as a Mineral Dust Model CompoundThe Journal of Physical Chemistry A, 2000
- Growth of Small Surface Indentation Cracks in Alumina and Zirconia Toughened AluminaKey Engineering Materials, 1996
- Corrosion Behavior of Alumina Ceramics in Caustic Alkaline Solutions at High TemperaturesJournal of the American Ceramic Society, 1991
- A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack MeasurementsJournal of the American Ceramic Society, 1981
- Lineal Intercept Technique for Measuring Grain Size in Two‐Phase Polycrystalline CeramicsJournal of the American Ceramic Society, 1972
- Average Grain Size in Polycrystalline CeramicsJournal of the American Ceramic Society, 1969