Strain-based methodology for mixed-mode I+II fracture: A new partitioning method for bi-material adhesively bonded joints
- 20 January 2019
- journal article
- conference paper
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 95 (5-7) , 385-404
Abstract
The dissemination of composite materials introduces applications of hybrid structures with composite and metal parts. The development of reliable methodologies to evaluate the performance of these structures is required. In this work, the mixed-mode fracture behaviour of a bi-material adhesively bonded joint is investigated. A new strain-based criterion for the design of the mixed-mode bending (MMB) bi-material specimen is suggested. A new analytical partitioning method based on the ‘global method’ is proposed and tested on a composite-to-metal bonded joint and compared with a finite element model using the virtual crack closure technique (VCCT). The results show that the proposed strain-based design methodology can be successfully used in MMB test for bi-material joints. The fracture mode partitioning is accurately predicted by the analytical method. However, the absolute values of the strain energy release rate (SERR) predicted by the analytical method are only accurate if the shear deformation in the test is not significant.Keywords
Funding Information
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (001)
- Netherlands Organisation for Scientific Research (14366)
This publication has 38 references indexed in Scilit:
- Experimental assessment of mixed-mode partition theoriesComposite Structures, 2012
- Mixed-mode (I+II) fracture characterization of wood bonded jointsConstruction and Building Materials, 2011
- Numerical analysis of the MMB test for mixed-mode I/II wood fractureComposites Science and Technology, 2007
- Mixed mode I + II interlaminar fracture of glass/epoxy multidirectional laminates – Part 2: ExperimentsComposites Science and Technology, 2006
- Use of FRP composites in civil structural applicationsConstruction and Building Materials, 2003
- Influence of fiber direction and mixed-mode ratio on delamination fracture toughness of carbon/epoxy laminatesComposites Science and Technology, 2003
- The Use of a Modified Mixed Mode Bending Test for Characterization of Mixed-mode Fracture Behavior of Adhesively Bonded Metal JointsThe Journal of Adhesion, 2002
- A mixed-mode failure criterion derived from tests on symmetric and asymmetric specimensComposites Science and Technology, 1999
- Mixed-mode fracture characterization of adhesive jointsComposites Science and Technology, 1994
- Mixed-mode bending method for delamination testingAIAA Journal, 1990