Effects of Injection Timings and Intake Port Flow Control on the In-Cylinder Wetted Fuel Footprints during PFI Engine Startup Process
Authors:
- 11 May 2005
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Wall-wetting due to liquid fuel film motion and fuel droplet impingement on combustion chamber walls is a major source of unburned hydrocarbons (UBHC), and is a concern for oil dilution in PFI engines. An experimental study was carried out to investigate the effects of injection timing, a charge motion control device, and the matching of injector with port geometry, on the “footprints” of liquid fuel inside the combustion chamber during the PFI engine starting process. Using a gasoline-soluble dye and filter paper deployed on the cylinder liner and piston top land surfaces to capture the liquid fuel footprints, the effects of the mixture formation processes on the wetted footprints can be qualitatively and quantitatively examined by comparing the wetted footprint locations and their color intensities. Real-time filming of the development of wetted footprints using a high-speed camera can also show the time history of the fuel wetting process inside an optically accessible engine. The results show that the cold-start in-cylinder wetted footprint is quite engine specific, depending on the intake-port to injector matching. The tumble mixture-motion plate inserted in the intake port creates more turbulence and enhances mixing during the intake process, and therefore significantly reduces the wetted fuel footprint. Limited UBHC measurements were also performed on the engine to compare with the imaging results.Keywords
This publication has 19 references indexed in Scilit:
- Contribution of Liquid Fuel to Hydrocarbon Emissions in Spark Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 2001
- A Visualization Study of Liquid Fuel Distribution and Combustion Inside a Port-Injected Gasoline Engine Under Different Start Conditions2000
- LIF and Flame-Emission Imaging of Liquid Fuel Films and Pool Fires in an SI Engine During a Simulated Cold StartSAE International Journal of Advances and Current Practices in Mobility, 1997
- Liquid Fuel Transport Mechanisms into the Cylinder of a Firing Port-Injected SI Engine During Start UpSAE International Journal of Advances and Current Practices in Mobility, 1997
- Spray Targeting Inside a Production-Type Intake Port of a 4-Valve Gasoline EngineSAE International Journal of Advances and Current Practices in Mobility, 1996
- Mixture Preparation and HC Emissions of a 4-Valve Engine with Port Fuel Injection During Cold Starting and Warm-upSAE International Journal of Advances and Current Practices in Mobility, 1995
- The Spray Characteristics of Automotive Port Fuel Injection-A Critical ReviewsSAE International Journal of Advances and Current Practices in Mobility, 1995
- Liquid Gasoline Behavior in the Engine Cylinder of a SI EngineSAE International Journal of Advances and Current Practices in Mobility, 1994
- Effects of Port-Injection Timing and Fuel Droplet Size on Total and Speciated Exhaust Hydrocarbon EmissionsSAE International Journal of Advances and Current Practices in Mobility, 1993
- Mixture Formation of Fuel Injection Systems in Gasoline EnginesSAE International Journal of Advances and Current Practices in Mobility, 1988