Etching of SiO2 in an electron cyclotron resonance argon plasma
Authors:
- 2 April 1990
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 56 (14) , 1311-1313
Abstract
Etching of SiO2 with low‐energy Ar ions has been studied in an electron cyclotron resonance (ECR) based etching system. Ion energies were controlled by a capacitively coupled 13.56 MHz bias of the substrate. Etch rates of over 100 Å/min have been achieved at ion energies below 100 V. The variation in etch rate has been studied as a function of ECR power, self‐induced bias, and position of the wafer relative to the ECR source. This low‐energy process can be utilized for cleaning of semiconductor surfaces prior to chemical vapor deposition or metallization processes.Keywords
This publication has 9 references indexed in Scilit:
- Characteristics of electron cyclotron resonance plasma sourcesJournal of Vacuum Science & Technology A, 1989
- Electron cyclotron resonance microwave discharges for etching and thin-film depositionJournal of Vacuum Science & Technology A, 1989
- Low-Temperature Surface Cleaning of GaAs by Electron Cyclotron Resonance (ECR) PlasmaJapanese Journal of Applied Physics, 1989
- Specific contact resistivity measurements of reactive ion etched contactsJournal of Vacuum Science & Technology A, 1988
- Plasma etching with a microwave cavity plasma disk sourceJournal of Vacuum Science & Technology B, 1988
- Silicon surface cleaning by low dose argon-ion bombardment for low-temperature (750 °C) epitaxial silicon deposition. I. Process considerationsJournal of Applied Physics, 1987
- Low Energy Ion Beam EtchingJournal of the Electrochemical Society, 1981
- Microwave Plasma EtchingJapanese Journal of Applied Physics, 1977
- Dependence of residual damage on temperature during Ar+ sputter cleaning of siliconJournal of Applied Physics, 1977