High corrosion resistance and weak corrosion anisotropy of an as-rolled Mg-3Al-1Zn (in wt.%) alloy with strong crystallographic texture
Open Access
- 22 November 2017
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 1-14
Abstract
Combining with electrochemical corrosion measurements, immersion and hydrogen evolution testing performed in 0.9 wt.% NaCl solution at 37 °C, the corrosion resistance of an as-rolled Mg-3%Al-1%Zn alloy before and after a 3% compressive strain along the rolling direction was investigated. Results revealed that the corrosion behavior of differently oriented surfaces of the as-rolled samples with a strong basal texture was obviously different. Among them, the corrosion rate of sample surface with the orientation parallel to the normal direction (ND) of the plate was the fastest, the corrosion rate of sample surface with the orientation parallel to the rolling direction (RD) of the plate took the second place and the corrosion rate of sample surface with the orientation parallel to the transverse direction (TD) was the slowest. After being pre-strained, the activation of a high density of {10–12} twins could remarkably reduce the corrosion rate of surrounding α-Mg matrix and simultaneously weaken the corrosion anisotropy between differently oriented samples. The main reason was that similar to grain boundaries, twin boundaries acted as physical barriers to the corrosion attack. Moreover, the activated twins increased the protectiveness of surface films and then suppressed the micro corrosion couples occurred in twinned grains.Keywords
This publication has 54 references indexed in Scilit:
- Crystal-orientation-dependent corrosion behaviour of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutionsCorrosion Science, 2016
- Effect of solution treatment on stress corrosion cracking behavior of an as-forged Mg-Zn-Y-Zr alloyScientific Reports, 2016
- Assessing the degradation performance of ultrahigh-purity magnesium in vitro and in vivoCorrosion Science, 2015
- Corrosion behaviors in physiological solution of cerium conversion coatings on AZ31 magnesium alloyApplied Surface Science, 2011
- In vitro corrosion and biocompatibility of binary magnesium alloysBiomaterials, 2009
- Design of a pseudo-physiological test bench specific to the development of biodegradable metallic biomaterialsActa Biomaterialia, 2008
- Control of biodegradation of biocompatable magnesium alloysCorrosion Science, 2007
- In vivo corrosion of four magnesium alloys and the associated bone responseBiomaterials, 2005
- Recent metallic materials for biomedical applicationsMetallurgical and Materials Transactions A, 2002
- Processing of biocompatible porous Ti and MgScripta Materialia, 2001